Kirklees · England
Bath chip & crack repair in Common Side, Kirklees
Bath repair in Common Side without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- Rust by the waste and overflow
- Damage done while the bathroom was being fitted
Bath repair in Common Side without replacing anything
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can generally use the bath the following day. We work on cast iron enamel, roll-top & freestanding and pressed steel enamel, and common reasons people contact us are hairline or through cracks in acrylic and snagging damage from a refit.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Common Side (HD8)
- County
- Kirklees
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath repair in Common Side
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Get in touch if you’ve noticed:
- Scuffs and scratches in the surface
- A kit repair that didn’t last
- A chipped rim or side
- Hairline or through cracks in acrylic
What your quote should include
- How long the guarantee is and what it covers
- Whether they match the colour on site
- Whether there are any call-out or travel charges
- What happens if they find more damage
What bath repair costs
Repairs from £95. Each job gets its own fixed price. This is what makes a difference:
- The size and number of damaged areas
- How hard the colour is to match
- The material
- Previous DIY repairs that have to come out
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Quotes from your photos
Photographing the damage takes a minute. Try to send:
- The postcode, so we can plan the visit
- Natural light rather than flash
- One picture of the whole bath
- Any details about the material
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Honest limits
Some jobs aren’t right for a repair, including:
- Leaking fittings, which need a plumber
- A bath that moves underfoot, until its support is fixed
- Rust that has eaten right through a steel bath
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
Our work in Common Side
Common Side is about 5 miles south of Mirfield, in Kirklees. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Common Side is one of 189 places in Kirklees we cover. We work right across the region, from Common Side to Leeds (about 15 miles away).
We work across HD8. We also cover the places around Common Side: Roydhouse (1 mile south-east), Linfit (1 mile north), Flockton Moor (1 mile north), Cross Roads (1 mile east) and Grange Moor (2 miles north-east). Further out, we also cover Huddersfield (5 miles north-west), Dewsbury (6 miles north), Batley (7 miles north), Mirfield (5 miles north), Liversedge (7 miles north) and Cleckheaton (8 miles north).
Landmarks near Common Side
Around Common Side, we work in homes near Kirkburton Church of England Voluntary Aided First School, Shelley College and The 3 Acres pub and the streets around them. For rail, the closest station is Shepley station, about 1.8 miles south-west. Well-known places in the area include Storthes Hall Hospital (1.8 miles west) and Cumberworth Half (2.2 miles south). For a walk, there is Castle Hill.
Landlord and trade work in Common Side
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Keeping it looking good
It’s all simple stuff:
- Ensure an acrylic bath is firm underfoot
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
- Rinse it down after each bath
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
Why repair rather than replace?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why choose Surface Doctor in Common Side
- A year’s guarantee on all work
- Free fixed quotes from pictures
- No extra charge for your area
- We leave the room as we found it
Read our full price list and bath cost comparison.
Common questions in Common Side
Are there extra charges for Common Side?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Do you cover the whole of Kirklees?
We work UK-wide, so Common Side is covered. Prices don’t change with location.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Places near Common Side
What else we do in Common Side
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
The process
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. Allow a few hours, depending on the damage, and we will keep you posted as we go.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the next day.
Before we arrive
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
- Open a window if you can
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
