Cheshire East · England
Bath chip & crack repair in Congleton Edge, Cheshire East
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Congleton Edge and across Cheshire East. Send photos for a free, fixed quote.
- Repairs from £95
- Scuffs and scratches in the surface
- Damage done while the bathroom was being fitted

Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Bath repair at your home in Congleton Edge
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Whether it’s damage done while the bathroom was being fitted and chips along the edge of the bath, we can help, on pressed steel enamel, roll-top & freestanding and acrylic alike.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Congleton Edge (CW12)
- Area hub
- Cheshire East
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026

Landlord and trade work in Congleton Edge
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Congleton Edge, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
Nearby places to Congleton Edge
Also in Congleton Edge
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Looking after it afterwards
To keep it looking its best:
- Cover the bath during DIY or decorating
- Keep abrasive pads and gritty cleaners away from the bath
- Keep metal cans and razors off the surface
- Use a soft cloth and washing-up liquid for everyday cleaning
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Where we work around Congleton Edge
Congleton Edge is about 2 miles south-east of Congleton, in Cheshire East. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 254 places across Cheshire East, from the larger towns to small villages. We work right across the region, from Congleton Edge to Manchester (about 23 miles away).
Postcode districts we cover here: CW12. We also cover the places around Congleton Edge: Whitemoor (1 mile east), Mossley (1 mile north), Pot Bank (1 mile south-west), Poolfold (1 mile south-east) and Gillow Heath (1 mile south). Further out, we also cover Crewe (12 miles west), Macclesfield (8 miles north), Wilmslow (13 miles north), Nantwich (15 miles west), Knutsford (13 miles north-west) and Middlewich (11 miles west).
Landmarks near Congleton Edge
We visit homes around Biddulph Valley Park, Mossley CofE Primary School and Holy Trinity Church. The closest station to Congleton Edge is Congleton station, roughly 1.1 miles north. A little further out are Haywood Hospital (5.9 miles south) and Mow Cop Castle (2.4 miles south-west). The countryside around Congleton Edge includes The Cloud and Limekiln Wood Nature Reserve.
What we do, step by step
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take a few hours.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Keep children and pets away from the room on the day
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Related advice
When we would advise against a repair
Before you book, it’s worth knowing the limits too:
- A bath worn all over, where resurfacing makes more sense
- A bath that moves underfoot, until its support is fixed
- Rust that has eaten right through a steel bath
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Repairing versus replacing in Congleton Edge
People frequently assume a cracked or chipped bath has to come out. Generally it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why choose Surface Doctor in Congleton Edge
- Colours mixed by hand to suit your surface
- Same prices wherever you are
- Free fixed quotes from pictures
- Rooms protected and left tidy
Take a look at our full price list or guide to resurfacing and replacement costs.
Your questions about bath repair in Congleton Edge
Do you repair coloured baths?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Will the repair show?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Is a bath repair permanent?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Is there any odour?
Expect a mild smell while we’re working.
Common problems we fix in Congleton Edge
Glass and heavy bottles cause more chips than anything else. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Customers normally contact us about:
- Impact holes in acrylic
- A chip where the taps sit
- An old repair that has yellowed or come loose
- Chips along the edge of the bath
Questions to ask before booking
- Aftercare advice
- If travel is included in the price
- How changes to the job are handled
- What the guarantee covers, and for how long
About our accreditations · Every repair comes with a one-year guarantee.

