Highland · Scotland
Bath Repair for Conon Bridge homes
Bath repair in Conon Bridge without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Repairs from £95
- A cracked acrylic bath
- Rust spots around the plughole
About our bath repair in Conon Bridge
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. If you are dealing with a chip where the taps sit and rusty patches near the plughole, we can help, whatever the material.
Every repair is covered by our one-year guarantee.
- Where
- Conon Bridge (IV7)
- County
- Highland
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
In fairness, there are a few things a repair will not fix:
- Flexing caused by a failed cradle or loose feet
- Metal that has corroded all the way through
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we’ll tell you honestly.
Materials we repair
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
Prices and what affects them
Prices start from £95. There is no charge for travel to Conon Bridge. The price depends on:
- How much damage there is
- Where the damage is and how we get to it
- The material
- Any earlier repairs that need removing first
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- A photo taken from further back
- The postcode, so we can plan the visit
- What it’s made of, if you know
- Any earlier repairs or coatings
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Repairs by material
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Landlord and trade work in Conon Bridge
We work for landlords, letting agents and housing providers in Conon Bridge as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Questions from Conon Bridge
Something went through my bath. Can it be fixed?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Do you cover Conon Bridge?
Yes. We cover the entire UK and travel to Conon Bridge and the rest of Highland. Send us photos for a fixed quote, or call 0345 017 0787.
Can you price it without visiting?
Usually, yes. Clear pictures let us give you a fixed price without visiting.
How long does the repair take to cure?
Most baths can be used the following day. We confirm the time before we leave.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Towns and villages near Conon Bridge
Other services in Conon Bridge
Our work in Conon Bridge
Conon Bridge is about 10 miles north-west of Inverness, in Highland. Our repair technicians come to customers in Conon Bridge and the surrounding area, so there is no workshop to go to. Our technicians cover 253 places in Highland.
We cover every part of the IV7 postcode area. That includes homes on Station Road, High Street and Leanaig Road. Main roads around Conon Bridge include the A862 and B9162, so getting to you is simple. Other places close to Conon Bridge include Maryburgh (1 mile north-west), Easter Kinkell (2 miles east), Dingwall (3 miles north), Muir of Ord (3 miles south) and Blairninich (4 miles north-west). We also work in nearby towns such as Inverness (10 miles south-east), Cradlehall (12 miles south-east), Merkinch (9 miles south-east), Hilton (11 miles south-east), Alness (11 miles north-east) and Invergordon (13 miles north-east). Some remote addresses need extra planning, so it’s best to call first.
Landmarks near Conon Bridge
Our clients here include homes close to Conon Hotel and Dingwall Academy and the streets around them. There is a railway station in Conon Bridge itself: Conon Bridge station. Further afield, we also cover the area around Ross Memorial Hospital (2.1 miles north) and Brahan Castle (2.2 miles west). The countryside around Conon Bridge includes Loch Ussie and Tollie Red Kites RSPB Reserve.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Ensure an acrylic bath is firm underfoot
- Use a soft cloth and washing-up liquid for everyday cleaning
- Put a towel in the bath if you are working above it
- Have new chips seen to early
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
How it works
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll get on with it. The job generally runs to a few hours, depending on the damage.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the day after.
Before we arrive
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
Read more
What we are called out for in Conon Bridge
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
The things clients normally mention when they call include:
- A hole punched through by something heavy
- Rusty patches near the plughole
- A kit repair that didn’t last
- A cracked acrylic bath
What your quote should include
- If travel is included in the price
- What the guarantee covers, and for how long
- A fixed price, and whether VAT is included
- What happens if the damage is worse than the photos show
About our accreditations · Every repair comes with a one-year guarantee.
