Bradford · England
Bath Repair for Cononley homes
Bath repair in Cononley without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A chip where the taps sit
About our bath repair in Cononley
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can usually use the bath the following day. We regularly repair cast iron enamel, acrylic and pressed steel enamel, and people most often call us about a chipped rim or side and a hole punched through by something heavy.
Every repair comes with a one-year guarantee.
- Where
- Cononley (BD20)
- Region
- Bradford
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Places near Cononley
Also in Cononley
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Our work in Cononley
Cononley is about 3 miles south of Skipton, in Bradford. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 140 towns and villages across Bradford. Our nearest city page is Leeds, about 20 miles away.
Here we cover the BD20 postcode area. Jobs here include addresses on Main Street, St John's Croft and Moorfoot View and the roads around them. Nearby, we also work in Glusburn (1 mile south-east), Lothersdale (2 miles west), Carleton-in-Craven (2 miles north-west), Skipton (3 miles north) and Stirton (4 miles north). Further out, we also cover Bradford (13 miles south-east), Keighley (5 miles south-east), Bingley (9 miles south-east), Shipley (12 miles south-east), Baildon (11 miles south-east) and Great Horton (13 miles south-east).
Local landmarks in Cononley
Our customers here include homes close to The Railway pub, South Craven School and St John the Evangelist and the streets around them. There’s a railway station in Cononley itself: Cononley station. Further afield, we also cover the area around Airedale General Hospital (2.5 miles south-east) and Keighley Private Classic Car Museum (1.7 miles south-east). Green spaces nearby include Redcar Tarn.
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Cononley. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- One-year guarantee on every repair
- Honest advice, even when it means no job
- Same prices wherever you are
- Colour-matched on site
Take a look at our prices page and guide to resurfacing and replacement costs.
How we price bath repair
Prices start from £95. We give every job a fixed quote from pictures. This is what makes a difference:
- Whether we combine several jobs
- Any earlier repairs that need removing first
- The colour and finish to match
- How much damage there is
The price reflects the work involved, not your postcode. You’ll see the full price before you book.
Send pictures for a quote
Phone photos are fine, there’s no need for anything special. Ensure they show:
- Whether it’s been repaired or coated before
- Any details about the material
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Cononley: your questions answered
Can you do more than one item on the same visit?
Of course, and it usually saves money. Just add the extra items to your pictures and you’ll get one combined price.
Can you repair a hole in a bath?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- Check that an acrylic bath does not move when you stand in it
- Don’t leave razors or cans standing in the bath
- Fix dripping taps early to stop staining and limescale
- Rinse it down after each bath
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
What we cannot put right
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
- Wear across the entire surface, which needs re-enamelling
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
How the visit works
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a morning or an afternoon, and you can get on with other things while we’re there.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can typically use the bath the day after.
Preparing for the visit
- Keep a parking space free if you can
- Make sure the room can be ventilated
- Let us know if it has been repaired before
How to get a price
Upload a picture of the damage and a wider shot of the entire item, and tell us you’re in Cononley, and we’ll come back with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
