County Durham · England
Bath chip & crack repair in Copley, County Durham
Bath repair for Copley, without a refit. Get a fixed price from your pictures, then we come to you.
- Repairs from £95
- A cracked acrylic bath
- Chips caused by builders
Bath repair at your home in Copley
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, typically in a single visit. We are frequently asked to fix a chipped rim or side and a kit repair that didn’t last, on whirlpool & spa baths, roll-top & freestanding and acrylic.
All our work is covered by a one-year guarantee, wherever you are in County Durham.
- Location
- Copley (DL13)
- Area hub
- County Durham
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
Nothing complicated is needed:
- Get any new chip repaired before it rusts
- Ensure an acrylic bath is firm underfoot
- Give the bath a quick rinse after use
- Cover the bath during DIY or decorating
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
What bath repair costs
Prices start from £95. There is no charge for travel to Copley. The price comes down to:
- The colour and finish to match
- Previous DIY repairs that have to come out
- The material
- How much damage there is
Our prices are the same across the UK, with no extra for Copley. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Your postcode, so we can check dates
- The material, if you know it
- A clear, close picture of the problem area
- Something in shot to show the size
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Common problems we fix in Copley
Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
The things customers typically mention when they call are:
- Snagging damage from a refit
- Hairline or through cracks in acrylic
- A hole punched through by something heavy
- Deep scratches in acrylic
Questions to ask before booking
- How changes to the job are handled
- A fixed price, and whether VAT is included
- How your room will be protected
- Who turns up on the day
Landlords, agents and businesses in Copley
We are used to working with agents and managing companies. Send the address, pictures and access details.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Copley and nearby
Copley is about 7 miles west of Bishop Auckland, in County Durham. Whether you’re in the middle of Copley or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Copley is one of 329 towns and villages in County Durham where we work. Our jobs stretch from Copley to Newcastle upon Tyne (about 27 miles away).
Our visits in DL13 work the same way as everywhere else we cover. From Copley Lane and Sun Road or a nearby road, a technician can come to you. With the B6282 close by, Copley is easy for our repair technicians to reach. If you’re just outside Copley, we cover Lynesack (1 mile north), Butterknowle (1 mile east), Lane Head (1 mile west), South Side (1 mile north-east) and The Slack (1 mile east). We also work in nearby towns such as Newton Aycliffe (11 miles east), Bishop Auckland (7 miles east), Spennymoor (11 miles north-east), Shildon (9 miles east), Crook (8 miles north-east) and Ferryhill (13 miles east).
Around Copley
Typical jobs here are in homes near Church of St John Evangelist and Butterknowle Primary School, among other places. Well-known places in the area include Raby Castle (3.3 miles south-east).
What we do, step by step
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes a few hours, depending on the damage. At the end we talk you through the curing time and the aftercare.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the following day, the bath is ready to use.
Getting ready for the visit
- Let the surface dry out before the visit
- Let us know which floor the room is on
- Let us know if it has been repaired before
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Advice
Copley: your questions answered
Can I add another job to the visit?
Of course, and it typically saves money. Send pictures of everything together and you will get one combined price.
What happens after I send pictures?
We review the pictures and send a fixed quote with dates.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
How long before I can use the bath?
Most baths can be used the day after. We confirm the time before we leave.
Will the price change on the day?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Nearby places to Copley
More services for Copley
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
What a repair can’t fix
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Rust that has eaten right through a steel bath
- Cracks in parts of an acrylic bath we can’t get to from below
- Water coming from the waste or taps rather than the bath
If in doubt, send pictures and we will say what we think.
Materials we repair
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
