County Durham · England

Bath chip & crack repair in Cornsay Colliery, County Durham

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Cornsay Colliery and across County Durham. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Chips along the edge of the bath
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Cornsay Colliery homes

Bath repair in Cornsay Colliery, done in place

Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. We’re often asked to fix holes from dropped items and a kit repair that didn’t last, in whirlpool & spa baths, pressed steel enamel and acrylic.

You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.

Before and after: a chipped, rust-stained bath around the plughole
Where
Cornsay Colliery (DH7)
County
County Durham
Cover
One year on every repair
Quote
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026

What affects the price in Cornsay Colliery

Repairs from £95. We don’t charge extra for travel to Cornsay Colliery. The price depends on:

  • The material
  • Whether we combine several jobs
  • The colour and finish to match
  • How much damage there is

A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Quotes from your photos

It only takes a minute to photograph the damage. Try to send:

  • One sharp close-up of the damage
  • A wider photo showing the whole bath
  • Details of any past repairs
  • Something in shot to show the size

If you’re in Cornsay Colliery and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Signs you need bath repair in Cornsay Colliery

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.

The most common problems we are called about are:

  • Rust by the waste and overflow
  • Damage done while the bathroom was being fitted
  • Scratches you can feel with a fingernail
  • Chips on the rim or sides

What to look for in a quote

  • Whether the colour is mixed to match
  • If travel is included in the price
  • Whether a trained technician does the job
  • How changes to the job are handled

Choosing a repair company

Cornsay Colliery: your questions answered

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across County Durham.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Can you repair a chip on a coloured bath?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

Do you come to Cornsay Colliery?

Yes. We cover the entire UK and come to Cornsay Colliery and the rest of County Durham. Send pictures and we will quote, or call 0345 017 0787.

Can you repair a crack in an acrylic bath?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.

Is there a call-out fee?

We don’t add a call-out fee. Your fixed quote includes everything.

Is a bath repair permanent?

A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.

Will the repair show?

We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we will tell you what to expect.

What a repair can’t fix

To be straight with you, some problems need a different fix:

  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Flexing caused by a failed cradle or loose feet
  • Water coming from the waste or taps rather than the bath

Send us photos and we will tell you honestly before booking.

Materials we work on in Cornsay Colliery

  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Pressed steel enamel

Work for landlords and builders

Landlords, letting agents and housing providers in Cornsay Colliery use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Repairing versus replacing in Cornsay Colliery

Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.

Why Cornsay Colliery clients choose us

  • CHAS and Constructionline accredited
  • One-year guarantee on every repair
  • A fixed quote before you book
  • Colours mixed by hand to suit your surface

Take a look at our full price list and resurfacing vs replacement cost guide.

Our work in Cornsay Colliery

Cornsay Colliery is about 5 miles north of Crook, in County Durham. Our technicians come to homes and businesses in Cornsay Colliery and nearby villages, so nothing has to leave your home. We cover 329 places across County Durham. You can also see our page for Newcastle upon Tyne, about 15 miles away.

Every address in DH7 is covered, from the main roads to the quietest streets. Jobs here include addresses on Knox Lane, Hedleyhill Lane and Commercial Street. We also cover the places around Cornsay Colliery: Quebec (1 mile north-east), Esh Winning (1 mile south-east), Waterhouses (2 miles south), East Hedleyhope (2 miles south-west) and Stanley Crook (3 miles south). We also work in nearby towns such as Durham (6 miles east), Consett (6 miles north-west), Newton Aycliffe (13 miles south-east), Bishop Auckland (9 miles south), Spennymoor (8 miles south-east) and Chester-le-Street (8 miles north-east).

What’s near Cornsay Colliery

Well-known places in the area include Brancepeth Castle (4.8 miles south-east) and Ushaw Historic House (3 miles east). Not far away are Stanley Moss.

Map of Cornsay Colliery © OpenStreetMap contributors

The process

We agree an arrival time beforehand, so you are not left guessing. On site, it takes two to three hours for most chips for most jobs. We leave the room clean and ready to use once it has cured.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. Once it has cured, usually by the following day, the bath is ready to use.

Before we arrive

  • Avoid using the area for a few hours before we arrive
  • Tell us about parking, stairs or access
  • Tell us about any previous repairs or coatings

Ask for a price

A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Send photos for a quote

Read more

Materials and what they mean for the repair

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

Aftercare tips

A little care keeps the finish looking good. We recommend:

  • Cover the bath during DIY or decorating
  • Don’t scrub with anything abrasive
  • Get a dripping tap fixed promptly
  • Keep metal cans and razors off the surface

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.

Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.