North Ayrshire · Scotland
Bath chip & crack repair in Corrie, North Ayrshire
Bath repair for Corrie, without a refit. Get a fixed quote from your pictures, then we come to you.
- Repairs from £95
- Chips under the taps
- An old repair that has yellowed or come loose
What we’re called out for in Corrie
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal lets water in, and rust follows.
These are the problems we’re asked about most:
- Scratches you can feel with a fingernail
- A kit repair that didn’t last
- Damage beneath the taps
- Cracks in an acrylic bath
What your quote should include
- How changes to the job are handled
- How long it needs to cure
- Whether a trained technician does the job
- How to look after the finish
Bath repair in Corrie without replacing anything
Most of our bath repairs take a few hours, and the bath is back in use the day after. There is no need to book a plumber or tiler, because nothing is disconnected. We are frequently asked to fix a cracked acrylic bath and an old repair that has yellowed or come loose, across cast iron enamel, whirlpool & spa baths and acrylic.
Big or small, it’s backed by a one-year guarantee.
- Where
- Corrie (KA27)
- County
- North Ayrshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- One-year guarantee on every repair
- CHAS, Constructionline and SafeContractor accredited
- Straight answers about what a repair can do
- A fixed quote before booking
Take a look at our pricing and guide to resurfacing and replacement costs.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Corrie and nearby
Corrie is about 14 miles west of Saltcoats, in North Ayrshire. Our technicians come to homes and businesses in Corrie and the surrounding area, so you do not need to take anything anywhere. Corrie is one of 53 towns and villages in North Ayrshire we cover. You can also see our page for Glasgow, about 37 miles away.
Every address in KA27 is covered. Other places close to Corrie include Brodick (4 miles south), Strathwhillan (4 miles south), Lamlash (7 miles south), Cordon (7 miles south) and Lochranza (8 miles north-west). We also work in nearby towns such as Saltcoats (14 miles east), Ardrossan (13 miles east), Stevenston (15 miles east), West Kilbride (12 miles east), Auchenharvie (14 miles east) and Millport (12 miles north-east). If you’re somewhere remote, call first so we can plan the visit.
Around Corrie
Around Corrie, we work in homes near Corrie Hotel and Corrie Free Church. Nearby you will also find Brodick Castle (2.8 miles south) and Isle of Arran Heritage Museum (3.6 miles south).
How the visit works
Arrival times are agreed in advance. Once we’re there, the work takes a few hours, depending on the damage for most jobs. The room is left tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
Preparing for the visit
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
- Point us to the nearest place to park
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Advice
When we would advise against a repair
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Corrie
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
Looking after it afterwards
So the finish stays in good condition:
- Keep abrasive pads and gritty cleaners away from the bath
- Rinse the bath after use, especially in hard water areas
- Check that an acrylic bath doesn’t move when you stand in it
- A dripping tap stains enamel, so fix it early
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Your questions about bath repair in Corrie
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
How do I get a price for bath repair in Corrie?
Repairs from £95. Every job gets a fixed quote from your pictures. Send a close-up and a picture of the whole item with your KA27 postcode.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
What areas do you cover?
All of North Ayrshire, and the rest of the UK. Travel is included in the price.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
How we price bath repair
Prices start from £95. We price every job individually, from your pictures. What matters most is:
- What kind of damage it is
- The colour and finish to match
- How many items we do on one visit
- Previous DIY repairs that have to come out
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from photos
Photographing the damage takes a minute. Please include:
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- Natural light rather than flash
- Where you are, by postcode
Most customers in Corrie get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Also in Corrie
About our accreditations · Every repair comes with a one-year guarantee.
