Highland · Scotland
Bath chip & crack repair in Corry, Highland
Fixed-price bath repair in Corry and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Chips caused by builders
- Deep scratches in acrylic
Bath repair at your home in Corry
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Whether it’s damage done while the bathroom was being fitted and a hole punched through by something heavy, we can help.
Whatever the size of the job, you get the same one-year guarantee in Corry and across Highland.
- Location
- Corry (IV49)
- Region
- Highland
- Guarantee
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Corry and nearby
Corry is in Highland. From the centre of Corry to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Corry is one of 253 places in Highland where we work.
Our repair technicians cover all of the IV49 postcode area. From Ford Road, Riverbank and Liveras Park or a nearby road, we can come to you. Other places close to Corry include An t-Àth Leathann (1 mile south), Blackpark (1 mile south-east), Harrapul (1 mile south-east), Kyleakin (7 miles east) and Kyle of Lochalsh (8 miles east). Some remote addresses need extra planning, so it’s best to call first.
Landmarks near Corry
Typical jobs here are in homes near Broadford Parish Church and the streets around them. Further afield, we also cover the area around Mackinnon Memorial Hospital (within half a mile north). The countryside around Corry includes Bheinn Shuardail and Lochan Cruinn.
When to call us in Corry
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Most people contact us after spotting one of these:
- Rust by the waste and overflow
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
- Snagging damage from a refit
Comparing quotes
- How the colour is matched
- What preparation is included
- How your room will be protected
- The length of the guarantee and what it covers
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Places near Corry
Also in Corry
Aftercare tips
A little care keeps the finish looking good. Our advice:
- A dripping tap stains enamel, so fix it early
- Clean with warm water and a mild detergent
- Rinse it down after each bath
- Protect the bath with a towel when doing jobs nearby
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
How the visit works
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to a few hours, depending on the damage, tidy-up included.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
Getting ready for the visit
- Let us know about parking or access
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
How to get a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
FAQs for Corry
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
When can I have a bath again?
Normally the day after. We will tell you the exact curing time when we finish.
Landlords, agents and businesses in Corry
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Corry as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
What bath repair costs
Prices start from £95. There’s no charge for travel to Corry. The price depends on:
- The size and number of damaged areas
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- The material and finish
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
Two or three clear photos are generally enough. It helps if you send:
- One picture of the whole bath
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- Any details about the material
If you are in Corry and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Repair or replace in Corry?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Same prices wherever you are
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
See our pricing and guide to resurfacing and replacement costs.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
