Greater London · England

Bath Repair for Coulsdon homes

Damaged bath in Coulsdon? We repair it in place, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Cracks in an acrylic bath
  • A chip where the taps sit
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Coulsdon

Bath repair in Coulsdon without replacing anything

A typical bath repair is a few hours’ work, and the bath is back in use the following day. There is no need to book a plumber or tiler, because the bath doesn’t move. Common call-outs are for holes from dropped items and chips under the taps, on whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Rusty chip next to a bath plughole, before and after repair
Location
Coulsdon (CR5, CR8, CR3)
Region
Greater London
Cover
A year, on every repair
Quotes
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams in Greater London and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

Aftercare tips

Most damage we see is avoidable. A few tips:

  • Get a dripping tap fixed promptly
  • Protect the bath with a towel when doing jobs nearby
  • Keep abrasive pads and gritty cleaners away from the bath
  • Give the bath a quick rinse after use

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

How the visit works

Here’s how a visit typically runs: we arrive on time, protect everything around the work area, do the job and tidy away. Allow two to three hours for most chips from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. The repair is left to cure, and most baths can be used the day after.

Preparing for the visit

  • Let us know about parking or access
  • Have somewhere for us to park nearby if possible
  • Mention if the room is upstairs or in a flat

Getting a price

You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.

Send photos for a quote

Advice

What bath repair costs

Repairs from £95. We charge the same across the UK, including Coulsdon. The price reflects:

  • How many items we do on one visit
  • Whether old repairs or coatings need taking off
  • What kind of damage it is
  • The colour and finish to match

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Getting a price from photos

We price nearly every job from photos. This is what we need:

  • One picture of the whole bath
  • Any details about the material
  • Whether it’s been repaired or coated before
  • A clear, close picture of the problem area

The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.

Should I try a DIY kit first?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Your questions about bath repair in Coulsdon

Can rust on a bath be repaired?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Can you redo an old repair?

Yes. We remove the old filler and start again. Mention it when you send photos.

Can I get a quote without a visit?

Nearly always. If photos don’t show enough, we will ask for another angle.

Is it OK to have pets in the house?

Just keep them out of the work area. We’ll tell you when the room can be used again.

What areas do you cover?

The entire UK, including all of Greater London. Just include your postcode and we’ll confirm dates.

Will the price change on the day?

Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Our work in Coulsdon

Coulsdon is about 13 miles south of London, in Greater London. We visit homes and businesses in Coulsdon, so you do not need to take anything anywhere. Coulsdon is one of 764 places in Greater London where we work. We work right across the region, from Coulsdon to London (13 miles away).

Our visits in CR5, CR8 and CR3 work the same way as everywhere else we cover. We regularly work on streets such as Hadleigh Grove, Farthing Way and Dobson Close. You will find Coulsdon on the B276 and B2030, which makes it straightforward to reach. We also cover the places around Coulsdon: Woodcote (1 mile north), Old Coulsdon (1 mile south-east), Woodmansterne (1 mile west), Chipstead (1 mile south-west) and Purley (2 miles north-east). Larger places within reach include London (13 miles north), City of Westminster (14 miles north), Marylebone (14 miles north), Kensington (13 miles north), St Pancras (15 miles north) and Shoreditch (15 miles north).

Near you in Coulsdon

We visit homes around Dollypers Hill, The Pembroke pub and St Andrew's Church and the streets around them. Other local landmarks include Smitham Primary School (under half a mile north-west) and Coulsdon Sixth Form College (1 mile south-east). Coulsdon has its own railway station: Coulsdon South station. Well-known places in the area include Croydon Airport Visitor Centre (3 miles north) and Purley War Memorial Hospital (2 miles north-east). For a walk, there is Duppas Hill and Mercers Lake.

Map of Coulsdon © OpenStreetMap contributors

What we can’t put right

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A steel bath rusted through
  • Flexing caused by a failed cradle or loose feet

Not sure? Send photos and we will give you a straight answer before you book.

Materials we work on in Coulsdon

  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths

Common problems we fix in Coulsdon

Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal lets water in, and rust follows.

If you can see any of these, send us a photo:

  • Rust by the waste and overflow
  • A failed DIY repair that’s discoloured or lifting
  • Holes from dropped items
  • Chips under the taps

What your quote should include

  • Whether a trained technician does the job
  • What happens if they find more damage
  • How long it needs to cure
  • How your room will be protected

Our hiring checklist

What your bath is made of matters

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.