Northamptonshire · England
Bath chip & crack repair in Crick, Northamptonshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Crick and across Northamptonshire. Free, fixed quotes from your pictures.
- Repairs from £95
- Rust by the waste and overflow
- A cracked acrylic bath
Bath repair in Crick without replacing anything
Most of our bath repairs take a few hours, and the bath is back in use the following day. You will not need a plumber or tiler, because nothing is disconnected. Typical jobs include impact holes in acrylic and damage done while the bathroom was being fitted, on whirlpool & spa baths, pressed steel enamel and cast iron enamel.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Crick (NN6)
- Region
- Northamptonshire
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Crick
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Same prices wherever you are
- Everything repaired in place
- Colour-matched on site
- Technicians who travel to you, UK-wide
See our pricing or guide to resurfacing and replacement costs.
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Honest limits
Before you book, it’s worth knowing the limits too:
- A steel bath rusted through
- Leaking fittings, which need a plumber
- Cracks in acrylic we can’t reach from underneath
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
What we’re called out for in Crick
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Common reasons people in Crick contact us are:
- Rust by the waste and overflow
- A hole punched through by something heavy
- A kit repair that didn’t last
- Chips on the rim or sides
What to look for in a quote
- Whether the price is fixed and includes VAT
- How long the guarantee is and what it covers
- Who will actually do the work
- Whether the price covers travel
Your questions about bath repair in Crick
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Do you repair coloured baths?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
What areas do you cover?
We work UK-wide, so Crick is covered. Prices don’t change with location.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Landlords, agents and businesses in Crick
If you manage property in Crick, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Landlords, letting agents and housing providers in Crick use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
What bath repair costs
Repairs from £95. Prices are worked out job by job, from your photos. What matters most is:
- The material and finish
- What kind of damage it is
- How many items we do on one visit
- Access to the area
A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from photos
It only takes a minute to photograph the damage. Please include:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- What it’s made of, if you know
- Details of any past repairs
For a price in Crick, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Where we work around Crick
Crick is about 5 miles east of Rugby, in Northamptonshire. Anywhere in NN6, we come to you. Crick is one of 364 places in Northamptonshire we cover. We work right across the region, from Crick to Birmingham (33 miles away).
Jobs in NN6 work the same way as everywhere else we cover. From High Street, Elms Farm Close and Church Street or a nearby road, we can come to you. If you are just outside Crick, we cover Yelvertoft (2 miles north), Kilsby (2 miles south-west), Barby Nortoft (2 miles west), Houlton (2 miles west) and Watford (2 miles south). We also work in nearby towns such as Northampton (12 miles south-east), Daventry (6 miles south), Market Harborough (13 miles north-east), Desborough (15 miles north-east), Moulton (13 miles east) and East Hunsbury (14 miles south-east).
Local landmarks in Crick
Typical jobs here are in homes near Red Lion Public House And Attached Barn, Church of St Margaret and Crick Primary School and the streets around them. Crick’s nearest station is Long Buckby station, about 4.3 miles south-east of the centre. Other landmarks nearby include St Luke's Hospital (5.1 miles west) and Lilbourne Castle (3.5 miles north-west).
How to care for the repair
Most damage we see is avoidable. These habits help:
- Keep metal cans and razors off the surface
- Fix dripping taps early to stop staining and limescale
- Don’t leave a fresh chip for long
- Protect the bath with a towel when doing jobs nearby
There’s nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a few hours. We tidy up before we leave and let you know when you can use it again.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, generally by the following day, the bath is ready to use.
How to prepare
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
Ask for a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Related advice
Other services in Crick
About our accreditations · Every repair comes with a one-year guarantee.
