Dumfries and Galloway · Scotland
Bath Repair in Crocketford
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Crocketford and across Dumfries and Galloway. Send photos for a free, fixed quote.
- Repairs from £95
- A chip where the taps sit
- Impact holes in acrylic
What affects the price in Crocketford
Repairs from £95. Every quote is fixed and free. What we take into account:
- The size and number of damaged areas
- How hard the colour is to match
- How easy the damage is to reach
- The material
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
How to get a fixed price
The better the photos, the more accurate the price. Here’s what we find most useful:
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- A picture taken from further back
- Any details about the material
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Bath repair in Crocketford, done in place
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. We regularly repair whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and people most frequently call us about deep scratches in acrylic and impact holes in acrylic.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Crocketford (DG2)
- Area hub
- Dumfries and Galloway
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Crocketford and nearby
Crocketford (Gaelic: Ninemile Bar) is about 9 miles west of Dumfries, in Dumfries and Galloway. Anywhere in DG2, we carry out the work at your property. Crocketford is one of 138 places in Dumfries and Galloway we cover. We work right across the region, from Crocketford to Glasgow (about 59 miles away).
We cover every part of the DG2 postcode area and the streets around it. We regularly work on streets such as Glenburn Gardens, Maiden Row and Elspeth Road and the roads around them. Neighbouring places we cover include Milton (2 miles south-east), Springholm (2 miles south-west), Kirkpatrick Durham (3 miles south-west), Shawhead (3 miles north-east) and Hardgate (4 miles south). Larger places within reach include Dumfries (9 miles east), Dalbeattie (7 miles south), Castle Douglas (8 miles south-west), Heathhall (11 miles east), Newbridge Drive (9 miles north-east) and Troqueer (9 miles east).
Around Crocketford
The countryside around Crocketford includes Bishop Forest Hill and Auchenreoch Loch.
Repair or replace in Crocketford?
Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Crocketford
- Nothing taken out or refitted
- Colour mixed on the day to match
- CHAS and Constructionline accredited
- A year’s guarantee on all work
See our prices page or guide to resurfacing and replacement costs.
When we’d advise against a repair
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
The process
The work is clean and fairly quiet. We protect the area first, then the work takes two to three hours for most chips. At the end we talk you through the curing time and the aftercare.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Advice
Places near Crocketford
Other services in Crocketford
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Crocketford questions
Is there any odour?
There may be a mild smell during the work.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
Can you quote from photos?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
How invisible is a bath repair?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
Common problems we fix in Crocketford
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal will start to rust.
If you can see any of these, send us a picture:
- Damage beneath the taps
- Chips caused by builders
- Scratches you can feel with a fingernail
- A failed DIY repair that is discoloured or lifting
Questions to ask before you book
- What happens if the damage is worse than the pictures show
- How to care for the finish
- If travel is included in the price
- The length of the guarantee and what it covers
How to care for the repair
To keep it looking its best:
- Clean with warm water and a mild detergent
- Get a dripping tap fixed promptly
- Rinse the bath after use, especially in hard water areas
- If an acrylic bath flexes, have its feet adjusted
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
