Kent · England
Bath chip & crack repair in Crockham Hill, Kent
Fixed-price bath repair in Crockham Hill and the surrounding area, typically in one visit and guaranteed for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- A chipped rim or side
About our bath repair in Crockham Hill
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. We are often asked to fix rust spots around the plughole and damage beneath the taps, on cast iron enamel, whirlpool & spa baths and acrylic.
Every job is backed for twelve months in Crockham Hill and everywhere else. If something goes wrong with the work, we come back.
- Location
- Crockham Hill (TN8)
- Area hub
- Kent
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Crockham Hill: your questions answered
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Is there any odour?
There may be a mild smell during the work.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Do you cover the whole of Kent?
All of Kent, and the rest of the UK. There’s no extra charge for travel.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Also near Crockham Hill
What else we do in Crockham Hill
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Do you need bath repair in Crockham Hill?
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.
These are the problems we are asked about most:
- Damage done while the bathroom was being fitted
- Rust by the waste and overflow
- Cracks in an acrylic bath
- A failed DIY repair that is discoloured or lifting
Before you book anyone
- What aftercare is recommended
- What preparation is included
- How soon you can use it again
- Whether they match the colour on site
Crockham Hill and nearby
Crockham Hill is about 6 miles south-west of Sevenoaks, in Kent. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover 922 places across Kent, from the larger towns to small villages. We work right across the region, from Crockham Hill to London (about 19 miles away).
Postcode districts we cover here: TN8. Streets in the area include Deanery Road, Main Road and Spout Lane, and we cover them all. Close by, we cover Goodley Stock (1 mile north), Pootings (1 mile south-east), Puddledock (1 mile east), The Chart (1 mile north-west) and Troy Town (2 miles south-west). Within a short drive, we also cover Sevenoaks (6 miles north-east), Royal Tunbridge Wells (11 miles south-east), Tonbridge (10 miles east), Swanley (12 miles north-east), Kings Hill (15 miles east) and Paddock Wood (15 miles east).
Landmarks near Crockham Hill
In Crockham Hill, that means homes near Holy Trinity Church, among other places. The nearest railway station is Edenbridge station, roughly 1.9 miles south. Nearby you’ll also find Hever Castle (4 miles south-east) and Haxted Watermill Museum (3.4 miles south-west). Not far away are Betsom's Hill and Dryhill Nature Reserve.
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
How to care for the repair
Aftercare is simple, and it makes a real difference:
- Check that an acrylic bath does not move when you stand in it
- Keep abrasive pads and gritty cleaners away from the bath
- A dripping tap stains enamel, so fix it early
- Rinse the bath after use, especially in hard water areas
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
For landlords and businesses
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. We charge the same wherever you are, with no extra for Crockham Hill. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- Colour-matched on site
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- Every repair guaranteed for a year
Take a look at our prices page or guide to resurfacing and replacement costs.
Prices and what affects them
Prices start from £95. We do not charge extra for travel to Crockham Hill. The price depends on:
- Unusual colours or finishes
- Doing more than one item at once
- Where the damage is and how we get to it
- The material and finish
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Good pictures mean an accurate price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- What it’s made of, if you know
- One picture of the whole bath
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which usually takes a few hours, depending on the damage. If we find something your pictures didn’t show, we will explain it before carrying on.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the next day.
Before we arrive
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
