Kent · England
Bath re-enamelling & resurfacing in Crockham Hill, Kent
Bath re-enamelling for Crockham Hill, without a refit. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Don’t use the bath until it has fully cured
- Keep toiletries on a shelf rather than in the bath
- Avoid suction-cup mats
- A quick wipe after use keeps limescale away
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Bath re-enamelling in Crockham Hill, done in place
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We’re often asked to fix chips and rust in more than one place and a coating lifting around the plughole, in acrylic baths, pressed steel baths and basins & shower trays.
Big or small, you get the same one-year guarantee.
- Location
- Crockham Hill (TN8)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Crockham Hill. What changes the price is:
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- Where the damage is and how we get to it
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
How to get a fixed quote
Most quotes are done from pictures alone. To make it quick:
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Common problems we fix in Crockham Hill
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is generally as strong as ever.
If you can see any of these, send us a photo:
- Staining under the taps and around the waste
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
Before you book anyone
- How the colour is matched
- Whether cleaning and preparation are in the price
- How your room will be protected
- If travel is included in the price
Landlords, agents and businesses in Crockham Hill
We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
The process
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for most of the day. Before leaving, we tell you how long to leave it and how to look after it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
Getting a price
Email us a picture of the damage and one of the whole item, with your TN8 postcode, and we will come back with a fixed quote.
Read more
Nearby places to Crockham Hill
More services for Crockham Hill
Where we work around Crockham Hill
Crockham Hill is about 6 miles south-west of Sevenoaks, in Kent. Our repair technicians come to homes and businesses in Crockham Hill and nearby villages, so you do not need to take anything anywhere. Our repair technicians cover 922 places across Kent, from the larger towns to small villages. Our jobs stretch from Crockham Hill to London (about 19 miles away).
Our visits in TN8 work the same way as everywhere else we cover. Local streets include Deanery Road, Main Road and Spout Lane, all of which we cover. Other places close to Crockham Hill include Goodley Stock (1 mile north), Pootings (1 mile south-east), Puddledock (1 mile east), The Chart (1 mile north-west) and Troy Town (2 miles south-west). Within a short drive, we also cover Sevenoaks (6 miles north-east), Royal Tunbridge Wells (11 miles south-east), Tonbridge (10 miles east), Swanley (12 miles north-east), Kings Hill (15 miles east) and Paddock Wood (15 miles east).
Near you in Crockham Hill
In Crockham Hill, that means homes near Holy Trinity Church. The closest station to Crockham Hill is Edenbridge station, about 1.9 miles south. Further afield, we also cover the area around Hever Castle (4 miles south-east) and Haxted Watermill Museum (3.4 miles south-west). Open spaces near Crockham Hill include Betsom's Hill and Dryhill Nature Reserve.
Common questions in Crockham Hill
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we’ll plan for it.
How long does re-enamelling take?
One day for most baths, ready the day after. We give you timings with the quote.
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
What happens if you find more damage?
The price is fixed for what the photos show. If there is more, we will tell you before starting.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price from your pictures. Send a close-up and a picture of the whole item with your TN8 postcode.
What a repair can’t fix
Before you book, it’s worth knowing the limits:
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Crockham Hill
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
