Wigan · England
Bath Repair in Crooke
Bath repair in Crooke without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- Holes from dropped items
- Damage beneath the taps
How we handle bath repair in Crooke
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, usually in a single visit. We’re frequently asked to fix an old repair that has yellowed or come loose and damage done while the bathroom was being fitted, across roll-top & freestanding, pressed steel enamel and whirlpool & spa baths.
Big or small, it’s backed by a one-year guarantee.
- Location
- Crooke (WN6)
- Area hub
- Wigan
- Cover
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
What you get with us
- Free fixed quotes from pictures
- No extra charge for your area
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
See our prices page and resurfacing vs replacement cost guide.
Towns and villages near Crooke
Also in Crooke
What we do, step by step
Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. Allow two to three hours for most chips.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the following day.
Before we arrive
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
How to get a price
Upload photos of the damage and one of the entire item, and tell us you are in Crooke, and we will reply with a fixed price.
Advice
Crooke and nearby
Crooke is about 2 miles south-west of Standish, in Wigan. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Crooke is one of 63 towns and villages in Wigan where we work. Our nearest city page is Liverpool, about 15 miles away.
Our technicians cover all of the WN6 postcode area. We regularly work on streets such as Princess Road, Wigan Lower Road and Linley Close and the roads around them. Nearby, we also work in Beech Hill (1 mile east), Shevington (1 mile north-west), Marsh Green (1 mile south), Gathurst (1 mile south-west) and Kitt Green (1 mile south). We also work in nearby towns such as Leigh (8 miles south-east), Ashton-in-Makerfield (5 miles south), Hindley (5 miles south-east), Atherton (8 miles east), Ince-in-Makerfield (3 miles south-east) and Scholes (3 miles south-east).
Near you in Crooke
We visit homes around Standish Lower Ground St Anne's CofE Primary School, St. John Fisher Catholic High School and The Old Springs pub, among other places. You’ll also find St Anne's Church (0.9 miles north-west), St John Rigby College (1.1 miles south-west) and Ashfield Park (1.5 miles north-east). Crooke’s nearest station is Gathurst station, about 0.8 miles west of the centre. Further afield, we also cover the area around The Galleries (2.1 miles south-east) and Blackrod Castle Croft (4.5 miles north-east). The countryside around Crooke includes Billinge Hill.
What a repair cannot fix
To be straight with you, some problems need a different fix:
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath worn all over, where resurfacing makes more sense
- Rust that has eaten right through a steel bath
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Crooke
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
Landlord and trade work in Crooke
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Do you need bath repair in Crooke?
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.
Send us a picture if you notice any of these:
- Scuffs and scratches in the surface
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
- Cracks in an acrylic bath
What to look for in a quote
- Whether the price covers travel
- Aftercare advice
- Is the price fixed, and does it include VAT?
- How long the guarantee is and what it covers
Crooke: your questions answered
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Materials and what they mean for the repair
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Have new chips seen to early
- Do not scrub with anything abrasive
- Rinse it down after each bath
- Check that an acrylic bath doesn’t move when you stand in it
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
