West Sussex · England
Bath Repair for Crossbush homes
Damaged bath in Crossbush? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Impact holes in acrylic
- Chips caused by builders
Common questions in Crossbush
Is there a call-out fee?
We do not add a call-out fee. Your fixed price includes everything.
Is a holed acrylic bath repairable?
Frequently, if there is access underneath. We back the hole, fill it and refinish the surface.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you’ll get one combined price.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Is the work guaranteed?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
About our bath repair in Crossbush
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. Whether it’s a kit repair that didn’t last and scratches you can feel with a fingernail, we can generally put it right, whatever the material.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Location
- Crossbush (BN18)
- Area hub
- West Sussex
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Cracks in parts of an acrylic bath we can’t get to from below
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A steel bath rusted through
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Crossbush and nearby
Crossbush is about 2 miles north of Littlehampton, in West Sussex. Anywhere in BN18, a technician comes to you. We work in all 371 towns and villages across West Sussex, from the larger towns to small villages. Our nearest city page is London, about 49 miles away.
Here we cover the BN18 postcode area. We also cover the places around Crossbush: Warningcamp (1 mile north-east), Poling (1 mile south-east), Lyminster (1 mile south-west), Arundel (1 mile north-west) and Toddington (1 mile south). Further out, we also cover Worthing (6 miles east), Bognor Regis (8 miles south-west), Chichester (11 miles west), Selsey (13 miles south-west), Shoreham-by-Sea (12 miles east) and Lancing (9 miles east).
Landmarks near Crossbush
We visit homes around The Littlehampton Academy and The Parish Church of St Mary Magdalen and the streets around them. For rail, the closest station is Arundel station, roughly 0.5 miles north-west of the centre. Nearby you will also find Lyminster Siege Castle (0.5 miles north) and Rustington Museum (2.8 miles south-east). Not far away are WWT Arundel and Highdown Hill.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Towns and villages near Crossbush
Other services in Crossbush
When to call us in Crossbush
A cracked acrylic bath usually wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the bath move.
Typical reasons for a call-out include:
- Snagging damage from a refit
- Rust spots around the plughole
- Chips along the edge of the bath
- Scuffs and scratches in the surface
Before booking anyone
- Who will actually do the work
- How changes to the job are handled
- Whether they match the colour on site
- The length of the guarantee and what it covers
Keeping it looking good
Simple care helps the repair last. Our advice:
- Keep metal cans and razors off the surface
- Rinse it down after each bath
- Fix dripping taps early to stop staining and limescale
- Clean with warm water and a mild detergent
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Should you replace it?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why Crossbush clients choose us
- Dust sheets down, tidy finish
- A year’s guarantee on all work
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
See our full price list or guide to resurfacing and replacement costs.
What happens on the day
There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take a few hours, tidy-up included.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Tell us about parking, stairs or access
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Read more
Prices and what affects them
Repairs from £95. We give every job a fixed price from photos. This is what makes a difference:
- Access to the area
- The size and number of damaged areas
- How many items we do on one visit
- Unusual colours or finishes
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send pictures for a quote
You can generally get a fixed quote without us visiting. To make it quick:
- The postcode, so we can plan the visit
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you’re under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
