Lancashire · England
Bath Repair in Crossgill
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Crossgill. Free, fixed quotes from your pictures.
- Repairs from £95
- Deep scratches in acrylic
- A chip where the taps sit
Your questions about bath repair in Crossgill
Do you work in Crossgill?
Yes, we do. We send a technician to Crossgill for every job, and the price is the same as everywhere else.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
When can I have a bath again?
Normally by the following day, though it depends on what we have done.
Is repairing better than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Can you quote from pictures?
In nearly every case. If photos don’t show enough, we’ll ask for another angle.
About our bath repair in Crossgill
A damaged bath does not have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, mixing the colour on the day. If you’re dealing with scratches you can feel with a fingernail and a chip where the taps sit, we can generally put it right.
All our work comes with a one-year guarantee, wherever you are in Lancashire.
- Where
- Crossgill (LA2)
- County
- Lancashire
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which typically takes a few hours. If we find something your photos didn’t show, we’ll explain it before carrying on.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the next day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Related advice
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Covering Crossgill
Crossgill is about 5 miles east of Lancaster, in Lancashire. We travel to homes and businesses in Crossgill and nearby villages, so there’s no workshop to go to. We cover all 482 towns and villages across Lancashire, from the larger towns to small villages. Our nearest city page is Manchester, about 44 miles away.
Our technicians cover all of the LA2 postcode area and the streets around it. We also travel to Caton Green (2 miles north), Caton (2 miles north-west), Claughton (3 miles north), Farleton (3 miles north) and Aughton (3 miles north). Larger places within reach include Lancaster (5 miles west), Morecambe (7 miles west), Heysham (9 miles west), Garstang (11 miles south), Westfield War Memorial Village (5 miles west) and Sandylands (8 miles west).
Local landmarks in Crossgill
Around Crossgill, we work in homes near Littledale Free Church, among other places. Nearby you’ll also find Hornby Castle (4.3 miles north-east) and Lancaster Moor Hospital (3.8 miles west). Open spaces near Crossgill include Grit Fell.
Work for landlords and builders
For anyone letting property in or around Crossgill, we will quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
How we price bath repair
Repairs from £95. Each job gets its own fixed price. These are the things that affect it:
- The type of damage
- What the surface is made of
- How many areas need work
- Doing more than one item at once
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Phone pictures are fine. Just ensure we can see:
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- A picture taken from further back
To get a price, send two or three pictures using our quote form or ring us. We will say right away if a repair is the right fix.
Repair or replace in Crossgill?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. A repair fixes just the damaged area in one visit. Our bath repair starts from £95. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why book with us
- Colour mixed on the day to match
- Work done at your home or business
- Accredited with CHAS, Constructionline and SafeContractor
- We’ll tell you if it’s not worth repairing
Take a look at our prices page or bath cost comparison.
When to call us in Crossgill
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
Look out for these signs:
- A failed DIY repair that is discoloured or lifting
- Scuffs and scratches in the surface
- Rust spots around the plughole
- A chipped rim or side
Questions to ask before you book
- How the room is protected while they work
- How to care for the finish
- If travel is included in the price
- When it can be used again
More services for Crossgill
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A steel bath rusted through
- Wear across the entire surface, which needs re-enamelling
- Acrylic cracks with no access behind them
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Put a towel in the bath if you’re working above it
- A dripping tap stains enamel, so fix it early
- Rinse the bath after use, especially in hard water areas
- Ensure an acrylic bath is firm underfoot
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
About our accreditations · Every repair comes with a one-year guarantee.
