Barnsley · England
Bath Repair in Crow Edge
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Crow Edge. Send pictures for a free, fixed quote.
- Repairs from £95
- A kit repair that didn’t last
- Cracks in an acrylic bath
Prices and what affects them
Prices start from £95. Each job gets its own fixed price. These are the things that affect it:
- Whether we combine several jobs
- Unusual colours or finishes
- What kind of damage it is
- The size and number of damaged areas
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
It only takes a minute to photograph the damage. Please include:
- The material, if you know it
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- A photo taken from further back
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Bath repair in Crow Edge, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Whether it’s rust by the waste and overflow and impact holes in acrylic, we can help.
Every repair is covered by our one-year guarantee, wherever you are in Barnsley.
- Area
- Crow Edge (S36)
- Area hub
- Barnsley
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Why repair rather than replace?
People frequently assume a cracked or chipped bath has to come out. In most cases it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- Technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
- Every repair guaranteed for a year
- One visit for most repairs
See our prices page and guide to resurfacing and replacement costs.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A bath worn all over, where resurfacing makes more sense
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we’ll say what we think.
Materials we work on in Crow Edge
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Crow Edge and nearby
Crow Edge is about 8 miles south of Huddersfield, in Barnsley. Wherever you are in the S36 postcode area, we come to you. Crow Edge is one of 94 places in Barnsley where we work. Our nearest city page is Leeds, about 20 miles away.
All of S36 is covered, from the main roads to the quietest streets. Jobs here include addresses on Fox Holes Grove, Middlecliffe Drive and Sledbrook Crescent and the roads around them. Nearby, we also work in Carlecotes (1 mile south-west), Hazlehead (1 mile south-east), Victoria (1 mile north-west), Barnside (2 miles north-west) and Dunford Bridge (2 miles south-west). Within a short drive, we also cover Barnsley (10 miles east), Wombwell (13 miles east), Wath upon Dearne (15 miles east), Shaw Lands (9 miles east), Hoyland (11 miles east) and Worsbrough (10 miles east).
Landmarks near Crow Edge
We visit homes around Church of St Anne, among other places. For rail, the closest station is Denby Dale station, about 3.5 miles north-east of the centre. Nearby you’ll also find Last Of The Summer Wine Exhibition (3.9 miles north-west) and Storthes Hall Hospital (5.4 miles north).
Signs you need bath repair in Crow Edge
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Customers usually contact us about:
- A chip where the taps sit
- Snagging damage from a refit
- Chips along the edge of the bath
- Impact holes in acrylic
What your quote should include
- What happens if the damage is worse than the pictures show
- Whether there are any call-out or travel charges
- Whether they match the colour on site
- Who will actually do the work
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Before we arrive
- Let us know if it has been repaired before
- Make sure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Places near Crow Edge
Also in Crow Edge
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Have new chips seen to early
- Cover the bath during DIY or decorating
- A dripping tap stains enamel, so fix it early
- Use a soft cloth and washing-up liquid for everyday cleaning
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
FAQs for Crow Edge
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Do the materials smell?
There can be some smell while we work. It fades as everything cures.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
How much does bath repair cost in Crow Edge?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
About our accreditations · Every repair comes with a one-year guarantee.
