Surrey · England
Bath chip & crack repair in Crowhurst Lane End, Surrey
Bath repair across Crowhurst Lane End and nearby, typically in one visit and guaranteed for a year.
- Repairs from £95
- Chips on the rim or sides
- Rusty patches near the plughole
Bath repair at your home in Crowhurst Lane End
Most of our bath repairs take a few hours, and you can typically bathe again the following day. You will not need a plumber or tiler, because nothing is disconnected. We are frequently asked to fix damage beneath the taps and a kit repair that didn’t last, in pressed steel enamel, cast iron enamel and roll-top & freestanding.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Where
- Crowhurst Lane End (RH8)
- Region
- Surrey
- Cover
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Crowhurst Lane End
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Which areas do you work in?
The entire UK, including all of Surrey. Send your postcode with your photos and we will confirm dates.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
What do you need from me?
Use the quote form or ring 0345 017 0787.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is repairing better than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Towns and villages near Crowhurst Lane End
Other services in Crowhurst Lane End
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Repairing versus replacing in Crowhurst Lane End
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Crowhurst Lane End clients choose us
- Honest advice, even when it means no job
- One price list for the whole UK
- Free fixed quotes from pictures
- We leave the room as we found it
Take a look at our prices page or resurfacing vs replacement cost guide.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Store metal items away from the bath
- Keep abrasive pads and gritty cleaners away from the bath
- A dripping tap stains enamel, so fix it early
- Cover the bath during DIY or decorating
Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
What we cannot put right
A repair isn’t always the answer, and we’d rather say so up front. Repairs will not solve:
- Cracks in parts of an acrylic bath we can’t get to from below
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
What happens on the day
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take a few hours.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the next day.
Getting ready for the visit
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Make sure the room can be ventilated
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
How we price bath repair
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- Unusual colours or finishes
- Any earlier repairs that need removing first
- The material
- What kind of damage it is
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.
Getting a price from photos
When you take your pictures, these tips help us give you a firm price:
- The postcode, so we can plan the visit
- Something in shot to show the size
- The material, if you know it
- One picture of the whole bath
Send us pictures of the damage and one of the entire item, with your RH8 postcode, and we’ll reply with a fixed price.
Common problems we fix in Crowhurst Lane End
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.
Get in touch if you’ve noticed:
- Chips under the taps
- A chipped rim or side
- Chips caused by builders
- Rust spots around the plughole
What to look for in a quote
- What happens if they find more damage
- Whether a trained technician does the job
- When it can be used again
- How the colour is matched
Where we work around Crowhurst Lane End
Crowhurst Lane End is about 6 miles south-east of Caterham, in Surrey. From the centre of Crowhurst Lane End to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Crowhurst Lane End is one of 395 towns and villages in Surrey where we work. You can also see our page for London, about 20 miles away.
All of RH8 is covered. We also cover the places around Crowhurst Lane End: Crowhurst (1 mile south-east), South Godstone (1 mile west), Tandridge (2 miles north), Merle Common (2 miles north-east) and Anglefield Corner (2 miles south-west). Further out, we also cover Epsom (13 miles north-west), Horley (7 miles west), Redhill (6 miles west), Ewell (14 miles north-west), Reigate (8 miles west) and Caterham (6 miles north-west).
Local landmarks in Crowhurst Lane End
Around Crowhurst Lane End, we work in homes near Church of St George and St Stephen's CofE Primary School, among other places. The nearest railway station is Godstone station, roughly 1.1 miles west of the centre. A little further out are Bletchingley Castle (3.9 miles north-west) and Foetal Alcohol Spectrum Disorders Clinic (3.1 miles north). Not far away are Bay Pond and Botley Hill.
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
