Worcestershire · England
Bath chip & crack repair in Crowle, Worcestershire
Local bath repair for Crowle: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- An old repair that has yellowed or come loose
- Impact holes in acrylic
Bath repair at your home in Crowle
Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, the tiles are not touched, and the finish is matched to the rest of the bath. Whether it’s hairline or through cracks in acrylic and chips along the edge of the bath, we can normally put it right, on cast iron enamel, pressed steel enamel and acrylic alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Crowle (WR7)
- Area hub
- Worcestershire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- The type of damage
- Unusual colours or finishes
- How much damage there is
- Doing more than one item at once
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your pictures
A couple of clear pictures is all it takes. Try to include:
- Where you are, by postcode
- The material, if you know it
- One picture of the whole bath
- A clear, close picture of the problem area
For a price in Crowle, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Places near Crowle
More services for Crowle
Aftercare tips
Aftercare is simple:
- Keep metal cans and razors off the surface
- Give the bath a quick rinse after use
- Fix dripping taps early to stop staining and limescale
- Use a soft cloth and washing-up liquid for everyday cleaning
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
Signs you need bath repair in Crowle
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
The most common problems we’re called about are:
- A kit repair that didn’t last
- Chips along the edge of the bath
- Scratches you can feel with a fingernail
- Snagging damage from a refit
Comparing quotes
- Whether a trained technician does the job
- How long the guarantee is and what it covers
- What protection goes down before work starts
- What preparation is included
When we would advise against a repair
We will not take on work that won’t last, so here’s what a repair cannot put right:
- Acrylic cracks with no access behind them
- Wear across the whole surface, which needs re-enamelling
- Metal that has corroded all the way through
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Crowle
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
What we do, step by step
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take two to three hours for most chips, and the room is left clean and tidy.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Let us know if it has been repaired before
- Clear toiletries, mats and anything else from around the area
- Let the surface dry out before the visit
Ask for a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll say right away whether it can be repaired.
Read more
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We work for landlords, letting agents and housing providers in Crowle as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- We’ll tell you if it’s not worth repairing
- Colour-matched on site
- Every repair guaranteed for a year
See our full price list and guide to resurfacing and replacement costs.
Questions from Crowle
How do I get a price for bath repair in Crowle?
Repairs from £95. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your WR7 postcode.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Can you repair a hole in a bath?
Normally. Send us a photo of the hole and one from under the bath if you can.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
What happens after I send photos?
You will get a fixed quote back. You are under no obligation.
Do you work in Crowle?
Yes. We work across the UK and come to Crowle and the rest of Worcestershire. Send pictures and we’ll quote, or call 0345 017 0787.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Where we work around Crowle
Crowle is about 4 miles south-east of Droitwich Spa, in Worcestershire. Wherever you are in the WR7 postcode area, we come to you. Our repair technicians cover all 376 towns and villages in Worcestershire. Our nearest city page is Birmingham, about 21 miles away.
Here we cover the WR7 postcode area. Jobs here include addresses on Church Road, Geneva Crescent and Froxmere Road and the roads around them. Nearby, we also work in Crowle Green (1 mile north-west), Sale Green (1 mile north), Tibberton (2 miles north-west), Oddingley (2 miles north) and Warndon (3 miles west). We also work in nearby towns such as Worcester (5 miles west), Redditch (10 miles north-east), Kidderminster (14 miles north-west), Bromsgrove (9 miles north), Great Malvern (11 miles south-west) and Droitwich Spa (4 miles north-west).
What’s near Crowle
Typical jobs here are in homes near The Old Chequers pub, Church of St John the Baptist and Crowle CofE First School, among other places. Crowle’s nearest station is Worcestershire Parkway station, roughly 3.8 miles south-west of the centre. Further afield, we also cover the area around Worcestershire Royal Hospital (3.2 miles west) and George Marshall Medical Museum (3.3 miles west). Not far away are Grafton Wood.
About our accreditations · Every repair comes with a one-year guarantee.
