Worcestershire · England
Bath re-enamelling & resurfacing in Crowle, Worcestershire
Local bath re-enamelling for Crowle: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- Thin, worn enamel in places
Bath re-enamelling in Crowle without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Typical jobs include stains that won’t shift and thin, worn enamel in places, across Victorian roll-tops, cast iron baths and pressed steel baths.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Crowle (WR7)
- County
- Worcestershire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Crowle?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why Crowle clients choose us
- Dust sheets down, tidy finish
- No need to remove anything
- Most jobs done in one visit
- Every repair guaranteed for a year
See our prices page or guide to resurfacing and replacement costs.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
- Holes rusted through the metal
Send us pictures and we will tell you honestly before you book.
What we work on
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
The process
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a full day. We tidy up before we leave and let you know when you can use it again.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the following day.
Before we arrive
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Have a window or extractor fan available
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Advice
FAQs for Crowle
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Do you work in Crowle?
Yes. We work across the UK and travel to Crowle and the rest of Worcestershire. Send photos and we will quote, or call 0345 017 0787.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Worcestershire.
Can you price it without visiting?
Typically, yes. Clear photos let us give you a fixed price without visiting.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Are there extra charges for Crowle?
We don’t add a call-out fee. Your fixed price includes everything.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Looking after it afterwards
Once the work has cured, treat it gently:
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
- Wipe the bath dry after use in hard water areas
- Avoid suction-cup mats
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Crowle. The price reflects:
- How many areas need work
- Doing more than one item at once
- How easy the damage is to reach
- The material
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
Two or three clear photos are usually enough. Try to include:
- Where you are, by postcode
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
To get a price, send a couple of pictures using our quote form or call us. We’ll say immediately whether it can be repaired.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Worcestershire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Covering Crowle
Crowle is about 4 miles south-east of Droitwich Spa, in Worcestershire. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. We work in 376 places in Worcestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 21 miles away.
All of WR7 is within our area. Whether you live on Church Road, Geneva Crescent and Froxmere Road or anywhere nearby, a technician can come to you. Close by, we cover Crowle Green (1 mile north-west), Sale Green (1 mile north), Tibberton (2 miles north-west), Oddingley (2 miles north) and Warndon (3 miles west). Within a short drive, we also cover Worcester (5 miles west), Redditch (10 miles north-east), Kidderminster (14 miles north-west), Bromsgrove (9 miles north), Great Malvern (11 miles south-west) and Droitwich Spa (4 miles north-west).
Around Crowle
We visit homes around The Old Chequers pub, Church of St John the Baptist and Crowle CofE First School, among other places. For rail, the closest station is Worcestershire Parkway station, about 3.8 miles south-west of the centre. Other landmarks nearby include Worcestershire Royal Hospital (3.2 miles west) and George Marshall Medical Museum (3.3 miles west). Open spaces near Crowle include Grafton Wood.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
More services for Crowle
What we are called out for in Crowle
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.
Clients normally contact us about:
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
- Brown or grey marks that do not clean off
- An outdated colour you’d like to change
What to look for in a quote
- What aftercare is recommended
- A fixed price, and whether VAT is included
- Whether the colour is mixed to match
- Who turns up on the day
About our accreditations · Every repair comes with a one-year guarantee.
