Cornwall · England
Bath Repair for Cubert homes
Problem with your bath in Cubert? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- An old repair that has yellowed or come loose
Bath repair in Cubert without replacing anything
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can typically use the bath the following day. We work on roll-top & freestanding, cast iron enamel and whirlpool & spa baths, and common reasons people contact us are impact holes in acrylic and deep scratches in acrylic.
Every repair is covered by our one-year guarantee, wherever you are in Cornwall.
- Area
- Cubert (TR8)
- Area hub
- Cornwall
- Warranty
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Cover the bath during DIY or decorating
- Get a dripping tap fixed promptly
- Check that an acrylic bath doesn’t move when you stand in it
- Stick to mild cleaners and a soft cloth
There is nothing special to do after a repair. Skip bleach and gritty creams.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Our work in Cubert
Cubert is about 3 miles south-west of Newquay, in Cornwall. Jobs in Cubert are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We cover all 644 towns and villages across Cornwall.
We work across TR8. Local streets include Lanlovie Meadow, Ellenglaze Court and Chynowen Parc, and we cover them all. We also cover the places around Cubert: Holywell (1 mile north-west), Trevowah (1 mile north), Reen Manor (2 miles south), Goonhavern (3 miles south) and Perranporth (3 miles south-west). Within a short drive, we also cover Truro (8 miles south), Newquay (3 miles north-east), St Austell (15 miles east), Camborne (14 miles south-west), Redruth (11 miles south-west) and Rosewarne (14 miles south-west).
Around Cubert
Our clients here include homes close to Church of St Cubert and Cubert School and the streets around them. Cubert’s nearest station is Newquay station, roughly 3 miles north-east. Nearby you’ll also find Newquay Community Hospital (2.9 miles north-east) and Gallery Of Old Newquay (2.7 miles north-east).
How it works
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. You can expect it to take a morning or an afternoon.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
- Ensure the room can be ventilated
How to get a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
Prices and what affects them
Repairs from £95. Every quote is fixed and free. What we take into account:
- Doing more than one item at once
- The type of damage
- How easy the damage is to reach
- The colour and finish to match
We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Before you send photos, a few simple things make all the difference:
- Natural light rather than flash
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
When we’d advise against a repair
A repair isn’t right for every job, including:
- Metal that has corroded all the way through
- A bath worn all over, where resurfacing makes more sense
- Leaking fittings, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
Repairing versus replacing in Cubert
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Cubert. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- Colour-matched on site
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- Most jobs done in one visit
See our pricing or bath cost comparison.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Common questions in Cubert
Can you quote from photos?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Can you repair something that’s been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Can you repair a failed DIY repair?
Regularly. We strip it out, deal with any rust and repair it again.
Will the price change on the day?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Places near Cubert
What else we do in Cubert
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
