Shetland Islands · Scotland

Bath chip & crack repair in Cullivoe, Shetland Islands

Our repair technicians come to Cullivoe for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Chips under the taps
  • Holes from dropped items
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Cullivoe

Bath repair at your home in Cullivoe

A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the next day. Typical jobs include cracks in an acrylic bath and scuffs and scratches in the surface, in cast iron enamel, roll-top & freestanding and whirlpool & spa baths.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

Area
Cullivoe (ZE2)
Area hub
Shetland Islands
Warranty
A year, on every repair
Quotes
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Different materials, different repairs

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

When we’d advise against a repair

We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:

  • A bath that moves underfoot, until its support is fixed
  • Water coming from the waste or taps rather than the bath
  • A bath worn all over, where resurfacing makes more sense

If in doubt, send photos and we’ll say what we think.

What we work on

  • Acrylic
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel

Prices and what affects them

Repairs from £95. You’ll know the full cost before you book. We look at:

  • How many items we do on one visit
  • Where the damage is and how we get to it
  • Whether it’s a chip, crack, burn or wear
  • Whether old repairs or coatings need taking off

The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.

Quotes from your pictures

Two or three clear pictures are typically enough. It helps if you send:

  • One sharp close-up of the damage
  • Daylight if possible, and no flash reflection
  • Any details about the material
  • One picture of the whole bath

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Should you replace it?

When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Prices start from £95. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why Cullivoe customers choose us

  • A fixed quote before booking
  • Most jobs done in one visit
  • Everything repaired in place
  • Honest advice, even when it means no job

Read our full price list and resurfacing vs replacement cost guide.

For landlords and businesses

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

We carry out planned and one-off repairs for housing associations and facilities teams in the Shetland Islands and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Covering Cullivoe

Cullivoe is in the Shetland Islands. We visit customers in Cullivoe and nearby villages, so nothing has to leave your home. Cullivoe is one of 63 places in the Shetland Islands where we work.

Postcode districts we cover here: ZE2. Being close to the B9083, Cullivoe is easy for our repair technicians to reach. Other places close to Cullivoe include Clivocast (4 miles south-east), Baltasound (6 miles north-east), Camb (7 miles south), Mid Yell (8 miles south) and Haroldswick (9 miles north-east). Remote and island addresses take a little more planning, so call us to arrange it.

Landmarks near Cullivoe

In Cullivoe, that means homes near St Olaf's Church. The countryside around Cullivoe includes Valla Field and Loch of Papil.

Map of Cullivoe © OpenStreetMap contributors

What we do, step by step

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a morning or an afternoon. If we find something your pictures didn’t show, we’ll explain it before carrying on.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can typically use the bath the following day.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Mention any parking restrictions or tricky access
  • Make sure the area is dry

How to get a price

Email us a picture of the damage and one of the entire item, and tell us you’re in Cullivoe, and we’ll reply with a fixed quote.

Get a fixed quote

Advice

Can I fix it myself?

If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

How to look after the repair

It’s all simple stuff:

  • Protect the bath with a towel when doing jobs nearby
  • Stick to mild cleaners and a soft cloth
  • Ensure an acrylic bath is firm underfoot
  • Avoid scourers, wire wool and gritty cream cleaners

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.

Questions from Cullivoe

Do you come to Cullivoe?

We do. We send a technician to Cullivoe for every job, with no extra charge for travel.

Is a cracked acrylic bath repairable?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.

Is repairing better than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Will the price change on the day?

We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Do you cover the entire of the Shetland Islands?

All of the Shetland Islands, and the rest of the UK. There is no extra charge for travel.

What happens once I’ve sent photos?

We check the damage, the material and your postcode, then reply with a quote with dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.