Shetland Islands · Scotland
Bath Repair in Clivocast
Our repair technicians come to Clivocast for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Chips on the rim or sides
- A chip where the taps sit

Bath repair in Clivocast, done in place
Most of our bath repairs take a few hours, and the bath is back in use the day after. You won’t need a plumber or tiler, because the bath does not move. Whether it’s chips under the taps and rusty patches near the plughole, we can help, on pressed steel enamel, cast iron enamel and whirlpool & spa baths alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.

- Where
- Clivocast (ZE2)
- Area hub
- Shetland Islands
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a few hours. We clean up when we are done and let you know when you can use it again.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Plan for the room to be out of bounds to pets and children
- Make sure the area is dry
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
Read more
What we cannot put right
Honesty matters more than a booking, so here’s what a repair will not do:
- Cracks in acrylic we can’t reach from underneath
- Flexing caused by a failed cradle or loose feet
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
For landlords and businesses
For anyone letting property in or around Clivocast, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Clivocast and nearby
Clivocast is in the Shetland Islands. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 63 places across the Shetland Islands, from the larger towns to small villages.
We cover every part of the ZE2 postcode area and the streets around it. Close by, we cover Cullivoe (4 miles north-west), Baltasound (6 miles north), Houbie (6 miles south), Camb (7 miles south-west) and Mid Yell (8 miles south-west). If you are somewhere remote, ring us first and we will plan the trip.
Local landmarks in Clivocast
Typical jobs here are in homes near Uyeasound Church. Well-known places in the area include Muness Castle (1.8 miles east). Not far away are Easter Loch and Valla Field.
Nearby places to Clivocast
More services for Clivocast
Questions from Clivocast
Can I add another job to the visit?
Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Do you cover Clivocast?
We do. We send a technician to Clivocast for every job, with no extra charge for travel.
What happens if you find more damage?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Will the repair last?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
Do you need bath repair in Clivocast?
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.
Most people contact us when they notice one of these:
- Rust by the waste and overflow
- Impact holes in acrylic
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
Comparing quotes
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
- How the colour is matched
- How the room is protected while they work
Prices and what affects them
Prices start from £95. You’ll know the full cost before you book. We take into account:
- The material and finish
- Where the damage is and how we get to it
- How many areas need work
- How hard the colour is to match
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
Quotes from your pictures
You can normally get a fixed price without us visiting. To help us price it:
- Any earlier repairs or coatings
- Something in shot to show the size
- What it’s made of, if you know
- Natural light rather than flash
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Aftercare tips
Most damage we see is avoidable. These habits help:
- Give the bath a quick rinse after use
- Ensure an acrylic bath is firm underfoot
- Avoid scourers, wire wool and gritty cream cleaners
- Have new chips seen to early
There’s nothing special to do after a repair, just sensible cleaning. Skip bleach and gritty creams and rinse after use.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
About our accreditations · Every repair comes with a one-year guarantee.

