Somerset · England
Bath chip & crack repair in Cutcombe, Somerset
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Cutcombe, with a one-year guarantee on every repair.
- Repairs from £95
- Damage beneath the taps
- Rusty patches near the plughole
Bath repair at your home in Cutcombe
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. We work on roll-top & freestanding, cast iron enamel and acrylic, and people most frequently call us about chips along the edge of the bath and holes from dropped items.
We stand behind the work with a one-year guarantee.
- Where
- Cutcombe (TA24)
- County
- Somerset
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Cutcombe and the surrounding area
Cutcombe is about 5 miles south-west of Minehead, in Somerset. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in 640 places across Somerset.
We work across TA24 and the streets around it. From Lower Park Lane, Higher Park Lane and Ashwell Lane or anywhere nearby, we can come to you. Nearby, we also work in Wheddon Cross (1 mile south-west), Timberscombe (3 miles north-east), Churchtown (3 miles east), Winsford (3 miles south-west) and Exton (3 miles south). We also work in nearby towns such as Minehead (5 miles north-east), Watchet (9 miles east), Wiveliscombe (12 miles south-east), Williton (9 miles east), Dulverton (7 miles south) and Porlock (5 miles north-west).
Near you in Cutcombe
Around Cutcombe, we work in homes near Cutcombe Church of England First School, The Rest and be Thankful Inn and Church of St John, among other places. Other landmarks nearby include Dunster Castle (4.7 miles north-east). Green spaces nearby include Staddon Hill.
Questions from Cutcombe
What happens next?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Can you price it without visiting?
Generally, yes. Clear photos let us give you a fixed quote without visiting.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. If there is more, we’ll tell you before starting.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Honest limits
To be straight with you, there are a few things a repair will not fix:
- A steel bath rusted through
- Cracks in parts of an acrylic bath we can’t get to from below
- Flexing caused by a failed cradle or loose feet
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
The process
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes a few hours, depending on the damage. At the end we talk you through the curing time and the aftercare.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
Get a quote
The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll say straight away whether it can be repaired.
Related advice
What we are called out for in Cutcombe
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
Clients normally contact us about:
- Damage done while the bathroom was being fitted
- Chips on the rim or sides
- An old repair that has yellowed or come loose
- Cracks in an acrylic bath
Comparing quotes
- Whether there are any call-out or travel charges
- Who will actually do the work
- What preparation is included
- Is the price fixed, and does it include VAT?
How to look after the repair
Looking after the surface is easy:
- Put a towel in the bath if you’re working above it
- Get any new chip repaired before it rusts
- Keep abrasive pads and gritty cleaners away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.
How we price bath repair
Prices start from £95. Each job gets its own fixed price. This is what makes a difference:
- The colour and finish to match
- Whether we combine several jobs
- The size and number of damaged areas
- Access to the area
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
We price nearly every job from pictures. This is what to send:
- One sharp close-up of the damage
- Any details about the material
- Good light, ideally daylight, without flash glare
- A wider photo showing the entire bath
Upload a picture of the damage and a wider shot of the whole item, and tell us you are in Cutcombe, and we’ll come back with a fixed quote.
Repairing versus replacing in Cutcombe
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- One visit for most repairs
- CHAS and Constructionline accredited
- No need to remove anything
- We leave the room as we found it
Take a look at our prices page or resurfacing vs replacement cost guide.
Towns and villages near Cutcombe
What else we do in Cutcombe
About our accreditations · Every repair comes with a one-year guarantee.
