Highland · Scotland

Bath Repair in Dalwhinnie

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Dalwhinnie and across Highland. Send photos for a free, fixed quote.

  • Repairs from £95
  • A chip where the taps sit
  • A chipped rim or side
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Dalwhinnie

How we handle bath repair in Dalwhinnie

We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. Common call-outs are for chips along the edge of the bath and a chip where the taps sit, in roll-top & freestanding, acrylic and cast iron enamel.

All our work is covered by our one-year guarantee, wherever you are in Highland.

Location
Dalwhinnie (PH19)
Area hub
Highland
Cover
One year on every repair
Quotes
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

Why repair rather than replace?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why Dalwhinnie customers choose us

  • One price list for the whole UK
  • Work done at your home or business
  • Every repair guaranteed for a year
  • A fixed quote before booking

Read our pricing and bath cost comparison.

Different materials, different repairs

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

When to call us in Dalwhinnie

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.

The most common problems we are called about are:

  • Damage beneath the taps
  • A kit repair that didn’t last
  • Impact holes in acrylic
  • Chips on the rim or sides

Questions to ask before booking

  • What happens if they find more damage
  • How soon you can use it again
  • Aftercare advice
  • A fixed quote, and whether VAT is included

Choosing a repair company

Dalwhinnie and nearby

Dalwhinnie is about 37 miles south of Inverness, in Highland. Customers in Dalwhinnie get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Dalwhinnie is one of 253 places in Highland we cover. We work right across the region, from Dalwhinnie to Glasgow (about 75 miles away).

We work across the PH19 postcode area. Streets in the area include General Wade's Military Road, Trium View and Ben Alder Road, and we cover them all. Other places close to Dalwhinnie include Etteridge (6 miles north-east), Laggan (6 miles north), Gergask (6 miles north), Newtonmore (10 miles north-east) and Kingussie (12 miles north-east). Some remote addresses need extra planning, so call us to arrange it.

Local landmarks in Dalwhinnie

There’s a railway station in Dalwhinnie itself: Dalwhinnie station. Green spaces nearby include Loch Caoldair.

Map of Dalwhinnie © OpenStreetMap contributors

Landlord and trade work in Dalwhinnie

Landlords, letting agents and housing providers in Dalwhinnie use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

Aftercare tips

A little care keeps the finish looking good. Our advice:

  • Rinse it down after each bath
  • Don’t leave a fresh chip for long
  • Fix dripping taps early to stop staining and limescale
  • Ensure an acrylic bath is firm underfoot

Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.

What a repair cannot fix

To be straight with you, some problems need a different fix:

  • Leaking fittings, which need a plumber
  • A bath that moves underfoot, until its support is fixed
  • A steel bath rusted through

Send us photos and we’ll tell you honestly before you book.

What we work on

  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths

What we do, step by step

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We clean up when we are done and let you know when you can use it again.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

How to prepare

  • Tell us if there are stairs or a lift
  • Keep pets and children out of the room while we work
  • Have somewhere for us to park nearby if possible

Getting a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Send photos for a quote

Related advice

Prices and what affects them

Prices start from £95. A fixed quote means you know the cost before you book. We look at:

  • The material and finish
  • Whether it’s a chip, crack, burn or wear
  • How hard the colour is to match
  • The size and number of damaged areas

We charge the same wherever you are, with no extra for Dalwhinnie. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Getting a price from pictures

Photographing the damage takes a minute, and it saves a visit. Please include:

  • Any details about the material
  • Details of any past repairs
  • Daylight if possible, and no flash reflection
  • Where you are, by postcode

There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

FAQs for Dalwhinnie

Can I add another job to the visit?

Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

How much does bath repair cost in Dalwhinnie?

Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Does someone need to be in?

We need someone to let us in. You don’t need to watch us work.

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

What happens after I send photos?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Do you repair coloured baths?

Yes. We mix the colour on the day to match, including older coloured suites.

Will I be able to see the repair?

On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.