Devon · England

Bath Repair for Derriton homes

Bath repair for Derriton, without a refit. Send us pictures for a fixed price, then book a visit.

  • Repairs from £95
  • Deep scratches in acrylic
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Derriton

Bath repair in Derriton, done in place

It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. If you’re dealing with an old repair that has yellowed or come loose and a cracked acrylic bath, we can help, on whirlpool & spa baths, pressed steel enamel and acrylic alike.

We stand behind the work with a one-year guarantee, so you are covered after the visit.

Location
Derriton (EX22)
Region
Devon
Warranty
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

What a repair can’t fix

A repair isn’t right for every job, including:

  • Cracks in parts of an acrylic bath we cannot get to from below
  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Metal that has corroded all the way through

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel

Repairs by material

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.

Landlords, agents and businesses in Derriton

We work for landlords, letting agents and housing providers in Derriton as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

What bath repair costs

Repairs from £95. You will know the full cost before booking. We take into account:

  • Whether it’s a chip, crack, burn or wear
  • The material
  • Previous DIY repairs that have to come out
  • The size and number of damaged areas

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

Quotes from your pictures

Most quotes are done from pictures alone. To make it quick:

  • Any earlier repairs or coatings
  • A coin or ruler next to the damage for scale
  • One sharp close-up of the damage
  • What it’s made of, if you know

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Your questions about bath repair in Derriton

Will the repair last?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

Do you cover the whole of Devon?

All of Devon, and the rest of the UK. There’s no extra charge for travel.

Will I be able to see the repair?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Is it worth repairing rather than replacing?

Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders.

What does bath repair cost?

Prices start from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.

Derriton and nearby

Derriton is about 16 miles south-west of Bideford, in Devon. Jobs in Derriton are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Derriton is one of 586 places in Devon where we work.

Jobs in EX22 work the same way as everywhere else we cover. Neighbouring places we cover include Torridge (1 mile north-east), Holsworthy (1 mile north-east), Whimble (1 mile east), Pyworthy (1 mile west) and Chilsworthy (2 miles north). We also work in nearby towns such as Great Torrington (14 miles north-east), Hatherleigh (13 miles east), Lifton (12 miles south) and Hartland (14 miles north).

Landmarks near Derriton

We visit homes around Rydon Inn, Holsworthy Church of England Primary School and Holsworthy Community College and the streets around them. Well-known places in the area include Holsworthy Museum (0.6 miles north-east). For a walk, there is Dunsdon National Nature Reserve.

Map of Derriton © OpenStreetMap contributors

Should you replace it?

A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Prices start from £95. Our prices are the same across the UK, with no extra for Derriton. The job itself decides the price: how much damage, what it’s made of and how many items.

Why us?

  • Most jobs done in one visit
  • We come to you, anywhere in the UK
  • No need to remove anything
  • We’ll tell you if it’s not worth repairing

See our pricing or guide to resurfacing and replacement costs.

How to look after the repair

After the repair has cured, a few habits help it last:

  • Make sure an acrylic bath is firm underfoot
  • Clean with warm water and a mild detergent
  • Have new chips seen to early
  • Give the bath a quick rinse after use

Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.

Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

What happens on the day

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes two to three hours for most chips. We tidy up before we leave and let you know when you can use it again.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Ensure the area is dry
  • Clear toiletries, mats and anything else from around the area
  • Mention if the room is upstairs or in a flat

How to get a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.

Send pictures for a quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.