York · England

Bath Repair for Derwenthorpe homes

We travel to Derwenthorpe for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.

  • Repairs from £95
  • Scuffs and scratches in the surface
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Derwenthorpe

Bath repair at your home in Derwenthorpe

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Typical jobs include cracks in an acrylic bath and a chipped rim or side, in pressed steel enamel, cast iron enamel and acrylic.

Whatever the size of the job, it’s backed by a one-year guarantee in Derwenthorpe and across York.

Before and after: a damaged acrylic bath corner repaired in place
Where
Derwenthorpe (YO31, YO10, YO19)
Area hub
York
Cover
12 months on all our work
Quotes
From £95. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026

DIY kit or professional repair?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Signs you need bath repair in Derwenthorpe

Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.

Signs it’s time to call us include:

  • Chips under the taps
  • Chips along the edge of the bath
  • Hairline or through cracks in acrylic
  • A failed DIY repair that is discoloured or lifting

Questions to ask before you book

  • Whether the price is fixed and includes VAT
  • Whether the price covers travel
  • Whether cleaning and preparation are in the price
  • How your room will be protected

Our hiring checklist

Repairing versus replacing in Derwenthorpe

When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Why book with us

  • No need to remove anything
  • Colour-matched on site
  • CHAS, Constructionline and SafeContractor accredited
  • Every repair guaranteed for a year

Take a look at our prices page and bath cost comparison.

Work for landlords and builders

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Covering Derwenthorpe

Derwenthorpe is about 2 miles east of York, in York. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Derwenthorpe is one of 79 places in York we cover. You can also see our page for Leeds, about 23 miles away.

We work across the YO31, YO10 and YO19 postcode area. From Stray Road, Tuke Avenue and Lang Avenue or anywhere nearby, a technician can come to you. Neighbouring places we cover include Tang Hall (1 mile west), Osbaldwick (1 mile south-east), Layerthorpe (1 mile west), Heworth (1 mile north-west) and Heslington (1 mile south). Within a short drive, we also cover Haxby (4 miles north-west), Acomb Park (4 miles south-west), Woodthorpe (4 miles south-west), Dringhouses (3 miles south-west), Strensall (5 miles north) and Acomb (3 miles west).

Local landmarks in Derwenthorpe

Typical jobs here are in homes near The Derwent Arms, St Aelred's Roman Catholic Voluntary Aided Primary School and Burnholme Community College and the streets around them. Nearby too are York Cemetery (1.5 miles south-west), Elmfield College (1.1 miles north-west) and Church of St Thomas (under half a mile south-east). The closest station to Derwenthorpe is York station, about 2.1 miles west of the centre. Well-known places in the area include Yorkshire Museum of Farming (1.3 miles east) and Coppergate Shopping Centre (1.6 miles west). Open spaces near Derwenthorpe include Kimberlow Hill.

  • Parks and local facilities nearby include Middlethorpe Without (2.9 miles south-west)
Map of Derwenthorpe © OpenStreetMap contributors

Prices and what affects them

Prices start from £95. You will know the full cost before you book. We take into account:

  • How many areas need work
  • How many items we do on one visit
  • Whether it’s a chip, crack, burn or wear
  • The material

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

How to get a fixed quote

Two or three clear photos are typically enough. Try to include:

  • Any earlier repairs or coatings
  • A photo taken from further back
  • A clear, close picture of the problem area
  • A coin beside the damage so we can judge size

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Derwenthorpe: your questions answered

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

What do you need from me?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Can you do more than one item on the same visit?

Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Can rust on a bath be repaired?

Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.

Can you repair a hole in a bath?

In most cases. Photos of the hole and the underside help us check.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Can you match an avocado or pink bath?

Yes, we match coloured baths too. The colour is tinted by hand on the day.

How it works

On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to a few hours, depending on the damage, tidy-up included.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Preparing for the visit

  • Have somewhere for us to park nearby if possible
  • Plan for the room to be out of bounds to pets and children
  • Make sure the room can be ventilated

How to get a price

Most clients in Derwenthorpe get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Send photos for a quote

Related advice

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

When we’d advise against a repair

We would rather lose a job than do one that won’t last, so these are the limits:

  • A bath worn all over, where resurfacing makes more sense
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Acrylic cracks with no access behind them

If in doubt, send pictures and we’ll say what we think before you book.

What we work on

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.