Pembrokeshire · Wales

Bath Repair for Dinbych-y-Pysgod homes

Damaged bath in Dinbych-y-Pysgod? We repair it in place, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Hairline or through cracks in acrylic
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Dinbych-y-Pysgod?

Bath repair in Dinbych-y-Pysgod, done in place

A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. We regularly repair pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and people most frequently call us about a chipped rim or side and chips under the taps.

You’re covered for a year from the day of the repair. If anything is not right, ring us and we will come back.

Bath enamel chip by the waste, filled and colour matched (before and after)
Area
Dinbych-y-Pysgod (SA70)
County
Pembrokeshire
Guarantee
A year, on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026

Dinbych-y-Pysgod questions

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Can you repair a hole in a bath?

Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.

What do you need from me?

Send photos through the quote form or call 0345 017 0787, and we will do the rest.

Can you repair several things at once?

Of course, and it typically saves money. Send pictures of everything together and we will quote them together.

Can you redo someone else’s repair?

Usually, yes. We remove the old repair before doing a new one.

How much does bath repair cost in Dinbych-y-Pysgod?

Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your SA70 postcode.

Do you cover the entire of Pembrokeshire?

We cover the entire UK, including Dinbych-y-Pysgod and the rest of Pembrokeshire. Just include your postcode and we will offer you dates.

What happens on the day

A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Allow a morning or an afternoon. Before leaving, we tell you when it can be used and how to look after it.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. Once it has cured, normally by the day after, the bath is ready to use.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Let us know about parking or access
  • Point us to the nearest place to park

How to get a price

Most clients in Dinbych-y-Pysgod get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Get a fixed quote

Read more

How to look after the repair

It’s all simple stuff:

  • Rinse it down after each bath
  • A dripping tap stains enamel, so fix it early
  • Put a towel in the bath if you’re working above it
  • Have new chips seen to early

Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.

Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Take it off before we arrive.

Landlords, agents and businesses in Dinbych-y-Pysgod

For anyone letting property in or around Dinbych-y-Pysgod, we will quote for several properties at once. Send pictures for each one and we will come back with a combined price.

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.

Why repair rather than replace?

For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why us?

  • Everything repaired in place
  • Same prices wherever you are
  • Dust sheets down, tidy finish
  • One visit for most repairs

See our full price list or guide to resurfacing and replacement costs.

Dinbych-y-Pysgod and nearby

Dinbych-y-Pysgod (Welsh: Tenby) is about 14 miles east of Milford Haven, in Pembrokeshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Dinbych-y-Pysgod is one of 223 towns and villages in Pembrokeshire where we work.

All of SA70 is within our area, from the main roads to the quietest streets. Local streets include High Street, Warren Street and Harding Street. Being close to the A478 and A4139, Dinbych-y-Pysgod is easy for our repair technicians to reach. We also cover the places around Dinbych-y-Pysgod: The Green (1 mile north-west), Penally (1 mile south-west), Broadfield (1 mile north), St Mary Out Liberty (1 mile north) and New Hedges (1 mile north). Within a short drive, we also cover Haverfordwest (15 miles north-west), Milford Haven (14 miles west), Pembroke (9 miles west), Pembroke Dock (10 miles west), The Marsh (14 miles north-west) and Green (9 miles west). Dinbych-y-Pysgod is among the bigger towns we cover in Pembrokeshire.

Landmarks near Dinbych-y-Pysgod

Typical jobs here are in homes near Ysgol Greenhill School, Ysgol Greenhill School and The Hilton Pub. Nearby too are St Teilos V.R.C. School (less than half a mile north) and St John's English Congregational Church (less than half a mile east). There is a railway station in Dinbych-y-Pysgod itself: Tenby station. Well-known places in the area include Tenby Castle (under half a mile east) and Tudor Merchant's House Museum (less than half a mile east). Not far away are St Catherine's Island.

Map of Dinbych-y-Pysgod © OpenStreetMap contributors

When we’d advise against a repair

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Acrylic cracks with no access behind them
  • Water coming from the waste or taps rather than the bath

If in doubt, send pictures and we will say what we think before booking.

What we work on

  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic

What bath repair costs

Repairs from £95. You will not pay by the hour. The price is based on:

  • Doing more than one item at once
  • How many areas need work
  • Any earlier repairs that need removing first
  • How easy the damage is to reach

There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed price

You can usually get a fixed price without us visiting. To help us price it:

  • A photo taken from further back
  • Details of any past repairs
  • What it’s made of, if you know
  • A clear, close picture of the problem area

You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

What your bath is made of matters

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.