Pembrokeshire · Wales

Bath chip & crack repair in Pembroke Dock, Pembrokeshire

Local bath repair for Pembroke Dock: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Cracks in an acrylic bath
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Pembroke Dock

Why repair rather than replace?

When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.

Why us?

  • Same prices wherever you are
  • One-year guarantee on every repair
  • Usually one visit, start to finish
  • Honest advice, even when it means no job

Read our full price list or resurfacing vs replacement cost guide.

How we handle bath repair in Pembroke Dock

Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. If you’re dealing with rust by the waste and overflow and impact holes in acrylic, we can normally put it right.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Before and after: a chipped, rust-stained bath around the plughole
Area
Pembroke Dock (SA72)
Area hub
Pembrokeshire
Cover
12 months on all our work
Quote
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Pembroke Dock questions

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

Can I add another job to the visit?

Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.

Will I be able to see the repair?

On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

What if the damage is worse than the pictures show?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

How quickly can you book me in?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

Will the repair last?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

Can you repair something that is been repaired before?

In most cases. We remove the old repair before doing a new one.

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Keeping it looking good

Looking after the surface is easy:

  • Fix dripping taps early to stop staining and limescale
  • Keep metal cans and razors off the surface
  • Don’t scrub with anything abrasive
  • Ensure an acrylic bath is firm underfoot

Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.

A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.

Do you need bath repair in Pembroke Dock?

Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.

Get in touch if you’ve noticed:

  • Holes from dropped items
  • Damage done while the bathroom was being fitted
  • A failed DIY repair that’s discoloured or lifting
  • Chips under the taps

Questions to ask before booking

  • A fixed quote, and whether VAT is included
  • What aftercare is recommended
  • What happens if they find more damage
  • The length of the guarantee and what it covers

10 questions to ask before booking

Pembroke Dock and the surrounding area

Pembroke Dock (Welsh: Doc Penfro) is about 34 miles west of Llanelli, in Pembrokeshire. From the centre of Pembroke Dock to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Pembroke Dock is one of 223 towns and villages in Pembrokeshire we cover.

Here we cover the SA72 postcode area. From High Street, Market Street and London Road or anywhere nearby, we can come to you. Being close to the A477 and A4139, Pembroke Dock is easy for our technicians to reach. Close by, we cover Llanion (1 mile north-east), Waterloo (1 mile east), Pennar (1 mile south-west), Llanreath (1 mile west) and Monkton (1 mile south). Larger places within reach include Haverfordwest (8 miles north), Milford Haven (4 miles west), The Marsh (8 miles north), Dinbych-y-Pysgod (10 miles east), The Green (10 miles east) and Pill (4 miles north-west). Pembroke Dock is among the bigger towns we cover in Pembrokeshire.

Local landmarks in Pembroke Dock

Around Pembroke Dock, we work in homes near Bush Tavern, Ysgol Harri Tudur/Henry Tudor School and Pembroke Dock CP School, among other places. Pembroke Dock has its own railway station: Pembroke Dock station. Other landmarks nearby include South Pembrokeshire Hospital (0.6 miles west) and Pembroke Castle (1.4 miles south-east). Open spaces near Pembroke Dock include Stackpole Estate and Ferry Wood.

  • Local facilities include Pembroke Dock: Llanion (0.6 miles east)
Map of Pembroke Dock © OpenStreetMap contributors

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Prices and what affects them

Repairs from £95. We price every job individually. What matters most is:

  • Any earlier repairs that need removing first
  • Doing more than one item at once
  • What the surface is made of
  • How many areas need work

Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Quotes from your pictures

You can typically get a fixed price without us visiting. To help us price it:

  • A wider photo showing the whole bath
  • The material, if you know it
  • Daylight if possible, and no flash reflection
  • Details of any past repairs

A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.

What happens on the day

You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It normally takes a few hours, depending on the damage, and you’re welcome to carry on with your day while we work.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the next day.

How to prepare

  • Keep a parking space free if you can
  • Move bottles, mats and clutter away from the area
  • Ensure the area is dry

Getting a price

To get a price, send two or three pictures using our quote form or call us. We will tell you honestly whether it can be repaired.

Get a fixed price

Related advice

Repairs by material

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.