Argyll and Bute · Scotland
Bath Repair for Dunbeg homes
Our technicians come to Dunbeg for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Scuffs and scratches in the surface
- A failed DIY repair that is discoloured or lifting
How we price bath repair
Prices start from £95. You will not pay by the hour. The price depends on:
- Where the damage is and how we get to it
- The material
- The size and number of damaged areas
- Previous DIY repairs that have to come out
Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Getting a price from pictures
Before you send pictures, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- The postcode, so we can plan the visit
Email us a photo of the damage and one of the whole item, with your PA37 postcode, and we will reply with a fixed price.
How we handle bath repair in Dunbeg
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Common call-outs are for damage done while the bathroom was being fitted and a hole punched through by something heavy, across whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
Big or small, it’s backed by a one-year guarantee in Dunbeg and across Argyll and Bute.
- Where
- Dunbeg (PA37)
- Region
- Argyll and Bute
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
People frequently assume a cracked or chipped bath has to come out. Usually it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Prices start from £95. A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.
What you get with us
- One-year guarantee on every repair
- Colour-matched on site
- Rooms protected and left tidy
- One visit for most repairs
Read our prices page and guide to resurfacing and replacement costs.
The process
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours, depending on the damage, and we will keep you posted as we go.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
Get a quote
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Advice
Nearby places to Dunbeg
What else we do in Dunbeg
When we’d advise against a repair
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
Landlord and trade work in Dunbeg
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
For anyone letting property in or around Dunbeg, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Rinse the bath after use, especially in hard water areas
- Fix dripping taps early to stop staining and limescale
- Check that an acrylic bath doesn’t move when you stand in it
- Do not leave razors or cans standing in the bath
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Questions from Dunbeg
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Which areas do you work in?
Across the UK, and that includes Dunbeg. Our prices are the same everywhere.
Can a cracked acrylic bath be fixed?
Generally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Repairs by material
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Covering Dunbeg
Dunbeg is in Argyll and Bute. Our technicians come to homes and businesses in Dunbeg and the surrounding area, so you do not need to take anything anywhere. We work in all 118 towns and villages in Argyll and Bute, from the larger towns to small villages. Our nearest city page is Glasgow, about 61 miles away.
Jobs in PA37 are booked in the same way as anywhere else. Whether you live on Young Crescent, Castle Road and Stewart Way or anywhere nearby, we can come to you. Other places close to Dunbeg include Ganavan (1 mile south-west), North Connel (2 miles north-east), Dunollie (2 miles south-west), Connel (2 miles east) and Oban (3 miles south). Remote and island addresses take a little more planning, so it’s best to call first.
Landmarks near Dunbeg
Around Dunbeg, we work in homes near Dunstaffnage Chapel. The closest station to Dunbeg is Connel Ferry station, roughly 2.5 miles east. Other landmarks nearby include Oban Museum (2.2 miles south-west) and Lorn and Islands Hospital (3.4 miles south). The countryside around Dunbeg includes Lochan Dubh.
About our accreditations · Every repair comes with a one-year guarantee.
