West Sussex · England
Bath chip & crack repair in East Grinstead, West Sussex
We travel to East Grinstead for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Chips caused by builders
- A chipped rim or side
About our bath repair in East Grinstead
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Typical jobs include cracks in an acrylic bath and rust spots around the plughole, on acrylic, pressed steel enamel and roll-top & freestanding.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- East Grinstead (RH19)
- Region
- West Sussex
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
East Grinstead questions
What happens after I send photos?
We come back with a fixed quote, usually with dates to choose from. There is no obligation to book.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can a cracked acrylic bath be fixed?
Usually, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
What we do, step by step
Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow two to three hours for most chips. Before leaving, we tell you how long to leave it and how to look after it.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the next day.
How to prepare
- Open a window if you can
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
How to get a price
If you’re in East Grinstead and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Related advice
When we would advise against a repair
We will not take on work that will not last, so these are the limits:
- Water coming from the waste or taps rather than the bath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we will say what we think.
Materials we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
Towns and villages near East Grinstead
More services for East Grinstead
Where we work around East Grinstead
East Grinstead is about 8 miles east of Crawley, in West Sussex. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 371 towns and villages in West Sussex. Our jobs stretch from East Grinstead to London (26 miles away).
All of RH19 is covered, from the main roads to the quietest streets. You’ll find streets such as Station Road, High Street and London Road. East Grinstead sits on or near the A22 and A264, so getting to you is simple. We also travel to Dormans Park (1 mile north), Saint Hill Green (2 miles south), Felbridge (2 miles north-west), Ashurst Wood (2 miles south-east) and Felcourt (2 miles north). Further out, we also cover Crawley (8 miles west), Horsham (14 miles west), Haywards Heath (10 miles south-west), Burgess Hill (13 miles south-west), Broadfield (9 miles west) and Bewbush (9 miles west). East Grinstead is one of the larger places we cover in West Sussex.
Local landmarks in East Grinstead
In East Grinstead, that means homes near Our Lady and St Peter's Church, The Railway pub and Sackville School. Also close by are St Mary's CofE Primary School (0.5 miles north-west) and Bush Davies School of Theatre Arts (1.3 miles north). East Grinstead has its own railway station: East Grinstead station. A little further out are East Grinstead Museum (under half a mile south-east) and Queen Victoria Hospital (0.8 miles north-east). Not far away are Hedgecourt Lake.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What bath repair costs
Prices start from £95. You won’t pay by the hour. The price is based on:
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- How much damage there is
- Access to the area
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Send pictures for a quote
Before you send photos, a few simple things make all the difference:
- Natural light rather than flash
- Details of any past repairs
- The postcode, so we can plan the visit
- What it’s made of, if you know
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
Keeping it looking good
Looking after the surface is easy:
- Keep metal cans and razors off the surface
- Cover the bath during DIY or decorating
- Have new chips seen to early
- Give the bath a quick rinse after use
There is nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams and rinse after use.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Repairing versus replacing in East Grinstead
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- A fixed quote before you book
- Work done at your home or business
- No extra charge for your area
- Colours mixed by hand to suit your surface
Take a look at our pricing or guide to resurfacing and replacement costs.
Common problems we fix in East Grinstead
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
The things customers usually mention when they call are:
- Snagging damage from a refit
- Chips along the edge of the bath
- Impact holes in acrylic
- Cracks in an acrylic bath
What your quote should include
- Whether cleaning and preparation are in the price
- The length of the guarantee and what it covers
- Who turns up on the day
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.
