Suffolk · England

Bath chip & crack repair in Eastbridge, Suffolk

Bath repair across Eastbridge and nearby, generally in one visit and guaranteed for a year.

  • Repairs from £95
  • Holes from dropped items
  • Scuffs and scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Eastbridge homes

Bath repair in Eastbridge, done in place

Most of our bath repairs take a few hours, and you can generally bathe again the following day. There is no need to book a plumber or tiler, because nothing is disconnected. We work on whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and the jobs we see most are scratches you can feel with a fingernail and snagging damage from a refit.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Where
Eastbridge (IP16)
Area hub
Suffolk
Warranty
12 months on all our work
Quotes
From £95. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

Repair or replace: which is better?

A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

What you get with us

  • Most jobs done in one visit
  • Work done at your home or business
  • Colours mixed by hand to suit your surface
  • Nothing taken out or refitted

See our full price list or guide to resurfacing and replacement costs.

Honest limits

To be straight with you, there are a few things a repair will not fix:

  • Metal that has corroded all the way through
  • Cracks in parts of an acrylic bath we can’t get to from below
  • Leaking fittings, which need a plumber

Send us photos and we will tell you honestly before you book.

Materials we work on in Eastbridge

  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths

Keeping it looking good

Simple care helps the repair last. We recommend:

  • Have new chips seen to early
  • Don’t leave razors or cans standing in the bath
  • Avoid scourers, wire wool and gritty cream cleaners
  • Give the bath a quick rinse after use

Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.

About Eastbridge

Eastbridge is about 17 miles south of Lowestoft, in Suffolk. Customers in Eastbridge get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Eastbridge is one of 731 towns and villages in Suffolk we cover.

Every address in IP16 is covered. You’ll find streets such as Chapel Road and Baker's Hill. Nearby, we also work in Theberton (1 mile west), Annesons Corner (1 mile west), Middleton (2 miles north-west), Westleton (2 miles north) and Middleton Moor (2 miles north-west). Further out, we also cover Woodbridge (15 miles south-west), Beccles (15 miles north), Halesworth (8 miles north-west), Carlton Colville (15 miles north), Framlingham (11 miles west) and Saxmundham (4 miles west).

Landmarks near Eastbridge

In Eastbridge, that means homes near Eels Foot pub, Church of St Peter and Alde Valley School. The closest station to Eastbridge is Darsham station, roughly 3.5 miles north-west of the centre. Well-known places in the area include Long Shop Museum (2.3 miles south). The countryside around Eastbridge includes Minsmere Nature Reserve.

Map of Eastbridge © OpenStreetMap contributors

What bath repair costs

Prices start from £95. We price every job individually. What matters most is:

  • How many items we do on one visit
  • The colour and finish to match
  • Previous DIY repairs that have to come out
  • Whether it’s a chip, crack, burn or wear

There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from photos

We price nearly every job from photos. This is what to send:

  • Good light, ideally daylight, without flash glare
  • Any details about the material
  • A close-up of the damage, in focus
  • Details of any past repairs

The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll say straight away if a repair is the right fix.

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

The process

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can normally use the bath the following day.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Keep children and pets away from the room on the day
  • Clear the area around the damage

How to get a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.

Get a fixed price

Related advice

Different materials, different repairs

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.

Questions from Eastbridge

Will the repair show?

We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.

Can you quote from pictures?

Nearly always. We only ask to see it in person if the pictures can’t show what we need.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.

Can rust on a bath be repaired?

Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.

Can you repair a chip on a coloured bath?

Yes, coloured baths are no problem. The colour is tinted by hand on the day.

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.

Do you cover the whole of Suffolk?

All of Suffolk, and the rest of the UK. Travel is included in the price.

Do I have to be there?

We need someone to let us in. You don’t need to watch us work.

For landlords and businesses

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.