Essex · England

Bath Repair in Easthorpe

We travel to Easthorpe for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Easthorpe

Bath repair at your home in Easthorpe

Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Whether it’s scratches you can feel with a fingernail and impact holes in acrylic, we can normally put it right, whatever the material.

Every repair is covered by our one-year guarantee, wherever you are in Essex.

Area
Easthorpe (CO5)
Area hub
Essex
Warranty
One year on every repair
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Prices and what affects them

Prices start from £95. Every quote is fixed and free. What we look at:

  • Whether we combine several jobs
  • Previous DIY repairs that have to come out
  • Whether it’s a chip, crack, burn or wear
  • How much damage there is

A repair is priced on what needs doing, not where you live. The full price is agreed before booking.

Getting a price from pictures

Almost every job we do is priced from pictures. This is what to send:

  • Whether it’s been repaired or coated before
  • The material, if you know it
  • The postcode, so we can plan the visit
  • Natural light rather than flash

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Keeping it looking good

Most damage we see is avoidable. A few tips:

  • If an acrylic bath flexes, have its feet adjusted
  • Put a towel in the bath if you’re working above it
  • Keep abrasive pads and gritty cleaners away from the bath
  • Do not leave a fresh chip for long

Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.

Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.

What your bath is made of matters

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

Your questions about bath repair in Easthorpe

Can you quote from photos?

In nearly every case. If pictures do not show enough, we’ll ask for another angle.

Will I be able to see the repair?

On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

When can I have a bath again?

Most baths can be used the following day. We confirm the time before we leave.

Something went through my bath. Can it be fixed?

Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

How do I book?

Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.

How much does bath repair cost in Easthorpe?

Repairs from £95. Every job gets a fixed price based on photos of the damage. Send a close-up and a picture of the entire item with your CO5 postcode.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

What we do, step by step

Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a few hours, depending on the damage. Before we go, we’ll explain when it can be used and what to avoid for the first few days.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Tell us about any previous repairs or coatings
  • Let the surface dry out before the visit
  • Have a window or extractor fan available

Ask for a price

Email us pictures of the damage and a wider shot of the whole item, and tell us you’re in Easthorpe, and we will reply with a fixed quote.

Send photos for a quote

Read more

Landlord and trade work in Easthorpe

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

For anyone letting property in or around Easthorpe, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.

DIY kit or professional repair?

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Where we work around Easthorpe

Easthorpe is about 6 miles west of Colchester, in Essex. Our technicians come to clients in Easthorpe, so there’s no workshop to go to. Easthorpe is one of 644 places in Essex we cover. You can also see our page for London, about 45 miles away.

Here we cover the CO5 postcode area. We also cover the places around Easthorpe: Mulberry Green (1 mile north-east), Marks Tey (1 mile north), Little Tey (2 miles north-west), Copford (2 miles north-east) and Messing (2 miles south-west). We also work in nearby towns such as Colchester (6 miles east), Chelmsford (15 miles south-west), Braintree (9 miles west), Maldon (10 miles south-west), Witham (7 miles south-west) and Camulodunum (4 miles east).

Near you in Easthorpe

Our customers here include homes close to Church of St Mary and House Without A Name Public House, among other places. For rail, the closest station is Marks Tey station, roughly 1.5 miles north of the centre. Further afield, we also cover the area around Anchor Press Museum (3.3 miles south) and Birch Castle (2.2 miles south-east). Not far away are Iron Latch.

Map of Easthorpe © OpenStreetMap contributors

What we’re called out for in Easthorpe

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

Send us a photo if you notice any of these:

  • Scratches you can feel with a fingernail
  • Rust spots around the plughole
  • Chips along the edge of the bath
  • Snagging damage from a refit

Before booking anyone

  • What happens if the damage is worse than the photos show
  • When it can be used again
  • What aftercare is recommended
  • Whether cleaning and preparation are in the price

Our hiring checklist

When a repair is not the answer

We will always be straight with you, so here’s what a repair can’t fix:

  • A bath worn all over, where resurfacing makes more sense
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A bath that moves underfoot, until its support is fixed

Send us pictures and we will tell you honestly.

Surfaces we repair

  • Cast iron enamel
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic
  • Roll-top & freestanding
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.