Norfolk · England
Bath chip & crack repair in Easton, Norfolk
We travel to Easton for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Cracks in an acrylic bath
- A hole punched through by something heavy
Your questions about bath repair in Easton
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we’ll plan for it.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
How long does the repair take to cure?
Typically within a day, depending on the repair.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Bath repair in Easton without replacing anything
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. We regularly repair acrylic, pressed steel enamel and cast iron enamel, and the jobs we see most are chips along the edge of the bath and rust spots around the plughole.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Easton (NR9)
- Area hub
- Norfolk
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Easton
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Signs you need bath repair in Easton
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Look out for these signs:
- Rusty patches near the plughole
- Chips along the edge of the bath
- Chips under the taps
- Cracks in an acrylic bath
What your quote should include
- What prep work is covered
- Whether a trained technician does the job
- How to look after the finish
- What the guarantee covers, and for how long
Easton and the surrounding area
Easton is about 5 miles west of Norwich, in Norfolk. Customers in Easton get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Easton is one of 797 towns and villages in Norfolk where we work.
Every address in NR9 is within our area. That includes homes on Parker's Close, Eddington Way and Garnett Drive. If you’re just outside Easton, we cover Lower Easton (1 mile north-west), Marlingford (1 mile south-west), Queen's Hills (1 mile north-east), Bawburgh (2 miles south-east) and Colton (2 miles west). We also work in nearby towns such as Norwich (5 miles east), Dereham (9 miles west), Wymondham (6 miles south), Sprowston (7 miles east), Thorpe St Andrew (8 miles east) and Attleborough (12 miles south-west).
What’s near Easton
Our clients here include homes close to St Peter's CofE Primary Academy, Church of St. Peter and Ormiston Victory Academy. Other landmarks nearby include Norfolk and Norwich University Hospital (3.4 miles south-east) and Costessey Hall (1.5 miles east). Not far away are Wensum Local Nature Reserve.
Also in Easton
What we cannot put right
A few problems are outside what a surface repair can do:
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
How we price bath repair
Prices start from £95. We do not charge extra for travel to Easton. The price depends on:
- Any earlier repairs that need removing first
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- How many areas need work
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
When you take your photos, a few simple things make all the difference:
- Something in shot to show the size
- A clear, close picture of the problem area
- A photo taken from further back
- Any earlier repairs or coatings
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
The process
We begin by going over the job with you. Then the area is sheeted and masked and we start. Allow a few hours, and we will keep you posted as we go.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
- Let us know if it has been repaired before
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Advice
Keeping it looking good
How the surface is treated afterwards matters:
- Give the bath a quick rinse after use
- Get any new chip repaired before it rusts
- Check that an acrylic bath doesn’t move when you stand in it
- Put a towel in the bath if you are working above it
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
About our accreditations · Every repair comes with a one-year guarantee.
