Southend-on-Sea · England

Bath chip & crack repair in Eastwood, Southend-on-Sea

Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Eastwood. Send pictures for a free, fixed quote.

  • Repairs from £95
  • A hole punched through by something heavy
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Eastwood

Bath repair in Eastwood without replacing anything

A typical bath repair is a few hours’ work, and you can normally bathe again the next day. You won’t need a plumber or tiler, because the bath doesn’t move. Our repair technicians work on whirlpool & spa baths, pressed steel enamel and acrylic, and the jobs we see most are hairline or through cracks in acrylic and snagging damage from a refit.

A one-year guarantee comes as standard, so you’re covered after the visit.

Rusty chip next to a bath plughole, before and after repair
Area
Eastwood (SS9, SS0, SS2)
County
Southend-on-Sea
Guarantee
A year, on every repair
Price
From £95. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026

How we price bath repair

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • What the surface is made of
  • Doing more than one item at once
  • Access to the area
  • Unusual colours or finishes

What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

Getting a price from photos

Before you send pictures, a few simple things make all the difference:

  • A close-up of the damage, in focus
  • A picture taken from further back
  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size

Most customers in Eastwood get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

How to care for the repair

Looking after the surface is easy:

  • Cover the bath during DIY or decorating
  • If an acrylic bath flexes, have its feet adjusted
  • Do not leave a fresh chip for long
  • Keep abrasive pads and gritty cleaners away from the bath

Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.

Common problems we fix in Eastwood

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.

The most common problems we are called about are:

  • Hairline or through cracks in acrylic
  • Damage done while the bathroom was being fitted
  • Chips along the edge of the bath
  • Rusty patches near the plughole

Questions to ask before you book

  • If travel is included in the price
  • What happens if they find more damage
  • How soon you can use it again
  • Whether the price is fixed and includes VAT

How to compare quotes

Why repair rather than replace?

Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why Eastwood clients choose us

  • Same prices wherever you are
  • Rooms protected and left tidy
  • Colour mixed on the day to match
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our pricing or guide to resurfacing and replacement costs.

How it works

Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for two to three hours for most chips from start to finish. Before leaving, we tell you how long to leave it and how to care for it.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Open a window if you can
  • Mention any parking restrictions or tricky access
  • Tell us about any previous repairs or coatings

Ask for a price

To get a price, send a couple of photos using our quote form or call us. We will say immediately whether it can be repaired.

Send pictures for a quote

Related advice

Landlord and trade work in Eastwood

Landlords, letting agents and housing providers in Eastwood use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Different materials, different repairs

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Eastwood and the surrounding area

Eastwood is about 2 miles north-west of Southend-on-Sea, in Southend-on-Sea. We travel to clients in Eastwood, so there’s no workshop to go to. We cover 16 places in Southend-on-Sea, from the larger towns to small villages. You can also see our page for London, about 33 miles away.

All of SS9, SS0 and SS2 is covered, from the main roads to the quietest streets. Jobs here include addresses on Green Lane, Hudson Road and Park Avenue and the roads around them. Close by, we cover Stroud Green (1 mile north-east), Leigh-on-Sea (1 mile south), Chalkwell (2 miles south), Hawkwell (2 miles north) and Rochford (2 miles north-east). Within a short drive, we also cover Shoeburyness (6 miles south-east), North Shoebury (5 miles east), Southchurch (4 miles south-east), Great Wakering (6 miles east) and Thorpe Bay (5 miles south-east).

Local landmarks in Eastwood

We visit homes around Bell House Public House, The Eastwood Academy and Heycroft Primary School, among other places. Nearby too are St David's (0.7 miles west) and Chalkwell Park (1.7 miles south). The closest station to Eastwood is Southend Airport station, roughly 1.8 miles east of the centre. Other landmarks nearby include Rayleigh Castle (2.9 miles north-west) and Southend Historic Aircraft Museum (1.8 miles east). Green spaces nearby include Great Wood and Dodd's Grove.

Map of Eastwood © OpenStreetMap contributors

FAQs for Eastwood

Can you repair a failed DIY repair?

Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Can you redo someone else’s repair?

In most cases. We remove the old repair before doing a new one, so let us know about it.

Will the repair last?

Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.

Can a cracked acrylic bath be fixed?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.

When can I have a bath again?

Most baths can be used the day after. We confirm the time before we leave.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.