Buckinghamshire · England
Bath Repair in Edgcott
Bath repair in Edgcott without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- Damage beneath the taps
- Scuffs and scratches in the surface
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Bath repair at your home in Edgcott
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on pressed steel enamel, cast iron enamel and acrylic, and people most often call us about a hole punched through by something heavy and chips along the edge of the bath.
Whatever the size of the job, you get the same one-year guarantee in Edgcott and across Buckinghamshire.
- Where
- Edgcott (HP18)
- Area hub
- Buckinghamshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Towns and villages near Edgcott
More services for Edgcott
The process
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
- Make sure the room can be ventilated
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
How to care for the repair
So the finish stays in good condition:
- Store metal items away from the bath
- Have new chips seen to early
- Rinse the bath after use, especially in hard water areas
- Use a soft cloth and washing-up liquid for everyday cleaning
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
What affects the price in Edgcott
Prices start from £95. We charge the same across the UK, including Edgcott. The price reflects:
- The size and number of damaged areas
- How hard the colour is to match
- The type of damage
- Access to the area
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- A picture taken from further back
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
About Edgcott
Edgcott is about 6 miles east of Bicester, in Buckinghamshire. Our technicians come to customers in Edgcott, so nothing has to leave your home. We work in 263 places across Buckinghamshire, from the larger towns to small villages. Our jobs stretch from Edgcott to London (48 miles away).
Every address in HP18 is within our area, from the main roads to the quietest streets. From Buckingham Road, St Michaels Close and Lawn House Lane or a nearby road, we can come to you. Nearby, we also work in Grendon Underwood (1 mile south), Ludgershall (3 miles south), Blackthorn (4 miles south-west), Piddington (4 miles south-west) and Brill (6 miles south). Within a short drive, we also cover Aylesbury (10 miles south-east), Buckingham (7 miles north), Elmhurst (10 miles south-east), Southcourt (11 miles south-east), Princes Risborough (14 miles south-east) and Haydon Hill (9 miles south-east).
Near you in Edgcott
Typical jobs here are in homes near Church of St Michael and Grendon Underwood Combined School. Green spaces nearby include Calvert Jubilee.
Edgcott: your questions answered
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Can a cracked acrylic bath be fixed?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Do you come to Edgcott?
We do. We send a technician to Edgcott for every job, with no extra charge for travel.
What do you need from me?
Use the quote form or ring 0345 017 0787.
Can you fix rust around the plughole?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
I tried a repair kit. Can you fix it?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Which areas do you work in?
Everywhere in the UK, Edgcott included. Travel is included in the price.
What we are called out for in Edgcott
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Keep an eye out for these signs:
- Holes from dropped items
- An old repair that has yellowed or come loose
- Snagging damage from a refit
- Rust by the waste and overflow
Comparing quotes
- Aftercare advice
- Whether the price covers travel
- Who turns up on the day
- Whether the price is fixed and includes VAT
Landlords, agents and businesses in Edgcott
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
We work for landlords, letting agents and housing providers in Edgcott as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Flexing caused by a failed cradle or loose feet
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
