Kent · England
Bath chip & crack repair in Egerton, Kent
Bath repair in Egerton without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- Scuffs and scratches in the surface
- A chip where the taps sit
About Egerton
Egerton is about 7 miles north-west of Ashford, in Kent. Whether you’re in the middle of Egerton or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in all 922 towns and villages across Kent. You can also see our page for London, about 41 miles away.
All of TN27 is covered. Local streets include The Street, Stevens Close and New Road, all of which we cover. We also cover the places around Egerton: Mundy Bois (1 mile south), Newland Green (1 mile south-west), Egerton Forstal (1 mile south-west), Pembles Cross (1 mile west) and Potter's Forstal (1 mile west). Further out, we also cover Maidstone (10 miles north-west), Ashford (7 miles south-east), Sittingbourne (10 miles north), Faversham (11 miles north-east), Kings Hill (15 miles west) and Davington (11 miles north-east).
Landmarks near Egerton
Typical jobs here are in homes near Egerton Church of England Primary School and Church of St James. The closest station to Egerton is Pluckley station, roughly 2.7 miles south of the centre. Other landmarks nearby include Coldbridge Castle (1.5 miles west).
About our bath repair in Egerton
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Typical jobs include deep scratches in acrylic and cracks in an acrylic bath, in pressed steel enamel, whirlpool & spa baths and roll-top & freestanding.
A one-year guarantee comes as standard.
- Location
- Egerton (TN27)
- Area hub
- Kent
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Egerton
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Repair or replace in Egerton?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why us?
- Dust sheets down, tidy finish
- One price list for the whole UK
- We come to you, anywhere in the UK
- Straight answers about what a repair can do
Take a look at our prices page and bath cost comparison.
How to care for the repair
Nothing complicated is needed:
- Put a towel in the bath if you are working above it
- A dripping tap stains enamel, so fix it early
- Have new chips seen to early
- Rinse it down after each bath
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we cannot reach from underneath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
How it works
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a morning or an afternoon, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Point us to the nearest place to park
- Tell us about parking, stairs or access
- Ensure the room can be ventilated
Ask for a price
Send us pictures of the damage and one of the entire item, with your TN27 postcode, and we will come back with a fixed quote.
Read more
More services for Egerton
Egerton questions
Can a cracked acrylic bath be fixed?
Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Will the repair last?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Is a repair better than a new one?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can you repair a hole in a bath?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Do you charge for travel?
We do not add a call-out fee. The fixed price covers the visit and the work.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Prices and what affects them
Repairs from £95. Quotes are free and the price is fixed. What we look at:
- Any earlier repairs that need removing first
- The colour and finish to match
- The material
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.
How to get a fixed quote
We price nearly every job from photos. This is what to send:
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- One picture of the whole bath
- Daylight if possible, and no flash reflection
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Common problems we fix in Egerton
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Get in touch if you’ve noticed any of these:
- Holes from dropped items
- Damage done while the bathroom was being fitted
- An old repair that has yellowed or come loose
- Chips on the rim or sides
Questions to ask before booking
- How long it needs to cure
- Is the price fixed, and does it include VAT?
- Aftercare advice
- How your room will be protected
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
