Kent · England
Bath Repair for Potter's Forstal homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Potter's Forstal. Free, fixed quotes from your photos.
- Repairs from £95
- A chipped rim or side
- Scratches you can feel with a fingernail
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why choose Surface Doctor in Potter's Forstal
- One price list for the whole UK
- No need to remove anything
- Colours mixed by hand to suit your surface
- Dust sheets down, tidy finish
Read our prices page and guide to resurfacing and replacement costs.
How we handle bath repair in Potter's Forstal
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Common call-outs are for rust spots around the plughole and a chipped rim or side, across whirlpool & spa baths, roll-top & freestanding and pressed steel enamel.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone.
- Where
- Potter's Forstal (TN27)
- County
- Kent
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair can’t fix
To be straight with you, there are a few things a repair will not fix:
- Cracks in acrylic we cannot reach from underneath
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
Not sure? Send photos and we will give you a straight answer.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
Common problems we fix in Potter's Forstal
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
It’s worth getting a quote if you see:
- Cracks in an acrylic bath
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
- A hole punched through by something heavy
What your quote should include
- Aftercare advice
- How the room is protected while they work
- How long the guarantee is and what it covers
- How changes to the job are handled
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Nearby places to Potter's Forstal
More services for Potter's Forstal
Aftercare tips
Once the work has cured, treat it gently:
- Fix dripping taps early to stop staining and limescale
- Do not scrub with anything abrasive
- Store metal items away from the bath
- Ensure an acrylic bath is firm underfoot
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Common questions in Potter's Forstal
Is a cracked acrylic bath repairable?
Often, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Is a holed acrylic bath repairable?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
What does bath repair cost?
Prices start from £95. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
What happens next?
You will get a fixed quote back, typically with dates to choose from. There is no obligation to book.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
What bath repair costs
Repairs from £95. Each job gets its own fixed price. This is what makes a difference:
- What kind of damage it is
- Where the damage is and how we get to it
- What the surface is made of
- The colour and finish to match
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- The material, if you know it
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
If you’re in Potter's Forstal and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Our work in Potter's Forstal
Potter's Forstal is about 8 miles north-west of Ashford, in Kent. Whether you’re in the middle of Potter's Forstal or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Potter's Forstal is one of 922 towns and villages in Kent where we work. We work right across the region, from Potter's Forstal to London (about 41 miles away).
Here we cover the TN27 postcode area. Nearby, we also work in Egerton Forstal (1 mile south-east), Pembles Cross (1 mile north), Newland Green (1 mile south-east), Mundy Bois (1 mile south-east) and Egerton (1 mile east). We also work in nearby towns such as Maidstone (9 miles north-west), Ashford (8 miles south-east), Sittingbourne (11 miles north), Faversham (12 miles north-east), Kings Hill (14 miles north-west) and Davington (12 miles north-east).
Around Potter's Forstal
We visit homes around Egerton Church of England Primary School. The closest station to Potter's Forstal is Pluckley station, roughly 2.9 miles south-east of the centre. Nearby you will also find Coldbridge Castle (0.8 miles north-west).
What we do, step by step
There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a few hours, depending on the damage, tidy-up included.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Let us know about parking or access
- Plan for the room to be out of bounds to pets and children
- Ensure the room can be ventilated
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
