Staffordshire · England
Bath chip & crack repair in Elmhurst, Staffordshire
Bath repair in Elmhurst without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Repairs from £95
- Chips along the edge of the bath
- Rusty patches near the plughole
About Elmhurst
Elmhurst is about 2 miles north of Lichfield, in Staffordshire. Wherever you are in the WS13 postcode area, we come to you. Elmhurst is one of 512 places in Staffordshire where we work. You can also see our page for Birmingham, about 17 miles away.
We cover every part of the WS13 postcode area. Streets in the area include Nash Lane and Fox Lane, all of which we cover. Neighbouring places we cover include Curborough (1 mile east), Longdon Green (2 miles north-west), Farewell (2 miles west), Stonywell (2 miles west) and Tuppenhurst (2 miles north-west). Larger places within reach include Stafford (14 miles north-west), Burton upon Trent (10 miles north-east), Tamworth (8 miles south-east), Cannock (8 miles west), Rugeley (6 miles north-west) and Burntwood (4 miles south-west).
Near you in Elmhurst
Around Elmhurst, we work in homes near The Friary School, Beacon Park and Elmhurst Mission Church and the streets around them. Other local landmarks include The Friary School (1.1 miles south-west) and Willows Primary School (0.8 miles south). The nearest railway station is Lichfield City station, about 1.9 miles south. A little further out are Letocetum Roman Baths And Museum (3.7 miles south) and Samuel Johnson Community Hospital (1.6 miles south-east). Open spaces near Elmhurst include George's Hayes and Stowe Pool.
Bath repair at your home in Elmhurst
Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We regularly repair cast iron enamel, acrylic and pressed steel enamel, and people most frequently call us about rust spots around the plughole and a failed DIY repair that’s discoloured or lifting.
All our work is covered by a one-year guarantee.
- Location
- Elmhurst (WS13)
- Area hub
- Staffordshire
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Elmhurst
Other services in Elmhurst
Common questions in Elmhurst
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
Is there a call-out fee?
We do not add a call-out fee. The fixed price covers the visit and the work.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
Which areas do you work in?
Everywhere in the UK, Elmhurst included. Travel is included in the price.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Landlord and trade work in Elmhurst
We work for landlords, letting agents and housing providers in Elmhurst as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
When we’d advise against a repair
A repair isn’t right for every job, including:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A steel bath rusted through
- Cracks in parts of an acrylic bath we can’t get to from below
If in doubt, send photos and we’ll say what we think.
Materials we work on in Elmhurst
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
How to look after the repair
To keep it looking its best for years:
- Store metal items away from the bath
- Cover the bath during DIY or decorating
- Rinse it down after each bath
- Check that an acrylic bath does not move when you stand in it
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for Elmhurst. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- Same prices wherever you are
- Work done at your home or business
- One-year guarantee on every repair
- Everything repaired in place
See our full price list and guide to resurfacing and replacement costs.
When to call us in Elmhurst
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
The things customers typically mention when they call include:
- Damage done while the bathroom was being fitted
- A cracked acrylic bath
- A kit repair that didn’t last
- Impact holes in acrylic
Before booking anyone
- If travel is included in the price
- Who turns up on the day
- Whether the colour is mixed to match
- How your room will be protected
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
How it works
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take a few hours, depending on the damage, including clearing up.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Make sure the area is dry
- Tell us about parking, stairs or access
- Open a window if you can
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
