Staffordshire · England

Bath re-enamelling & resurfacing in Elmhurst, Staffordshire

Local bath re-enamelling for Elmhurst: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Elmhurst

Bath re-enamelling in Elmhurst without replacing anything

After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s an old resurfacing that’s failing and a coloured bath you want in white, we can usually put it right.

A one-year guarantee comes as standard.

Basin with yellowed glaze resurfaced to a clean white finish
Area
Elmhurst (WS13)
County
Staffordshire
Cover
A year, on every repair
Price
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026

What a repair can’t fix

Some jobs aren’t right for a repair, including:

  • Leaks from fittings rather than the bath
  • Steel that has corroded right through
  • Problems we cannot see until an old finish comes off

If in doubt, send photos and we will say what we think.

What we work on

  • Cast iron baths
  • Acrylic baths
  • Pressed steel baths
  • Victorian roll-tops
  • Basins & shower trays

How to care for the repair

A little care keeps the finish looking good. We recommend:

  • Dry the bath after use to stop limescale
  • Avoid suction-cup mats
  • Keep toiletries on a shelf rather than in the bath
  • Have chips seen to early

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.

Different materials, different repairs

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

DIY kit or professional repair?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

How we price bath re-enamelling

Resurfacing from £350. There is no charge for travel to Elmhurst. The price comes down to:

  • Previous DIY repairs that have to come out
  • The size and number of damaged areas
  • The material and finish
  • How hard the colour is to match

We charge the same wherever you are, so there’s no premium for Elmhurst. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Quotes from your pictures

You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:

  • Any details about the material
  • Any earlier repairs or coatings
  • A clear, close picture of the problem area
  • A photo taken from further back

There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

If you manage property in Elmhurst, we will quote for several properties at once. Send pictures for each one and we will come back with a combined price.

Covering Elmhurst

Elmhurst is about 2 miles north of Lichfield, in Staffordshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We cover all 512 towns and villages in Staffordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 17 miles away.

We work across WS13. Jobs here include addresses on Nash Lane and Fox Lane and the roads around them. We also cover the places around Elmhurst: Curborough (1 mile east), Longdon Green (2 miles north-west), Farewell (2 miles west), Stonywell (2 miles west) and Tuppenhurst (2 miles north-west). Further out, we also cover Stafford (14 miles north-west), Burton upon Trent (10 miles north-east), Tamworth (8 miles south-east), Cannock (8 miles west), Rugeley (6 miles north-west) and Burntwood (4 miles south-west).

Near you in Elmhurst

Around Elmhurst, we work in homes near The Friary School, Beacon Park and Elmhurst Mission Church and the streets around them. Nearby too are The Friary School (1.1 miles south-west) and Willows Primary School (0.8 miles south). Elmhurst’s nearest station is Lichfield City station, about 1.9 miles south. Further afield, we also cover the area around Letocetum Roman Baths And Museum (3.7 miles south) and Samuel Johnson Community Hospital (1.6 miles south-east). Open spaces near Elmhurst include George's Hayes and Stowe Pool.

Map of Elmhurst © OpenStreetMap contributors

How the visit works

On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll take it from there. The job generally runs to a full day, tidy-up included.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

How to prepare

  • Let us know about parking or access
  • Avoid using the area for a few hours before we arrive
  • Keep children and pets away from the room on the day

Get a quote

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.

Send photos for a quote

Related advice

Repair or replace in Elmhurst?

Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the entire surface with the bath left where it is. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

What you get with us

  • Dust sheets down, tidy finish
  • One-year guarantee on every repair
  • Same prices wherever you are
  • Free fixed quotes from pictures

See our prices page and resurfacing vs replacement cost guide.

FAQs for Elmhurst

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

Can you resurface a pink bath in white?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

Can you repair something that’s been repaired before?

Generally, yes. Let us know what was used before.

Do you work in Elmhurst?

Yes. We work across the UK and travel to Elmhurst. Send pictures and we will quote, or call 0345 017 0787.

What happens once I’ve sent photos?

We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.

Is there any odour?

Some materials have a smell while they’re applied. It clears as the materials cure.

Will the price change on the day?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

How do I get a price for bath re-enamelling in Elmhurst?

Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.