Greater London · England
Bath Repair for Enfield Chase homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Enfield Chase, with a one-year guarantee on every repair.
- Repairs from £95
- Scratches you can feel with a fingernail
- Chips along the edge of the bath
How it works
We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes a few hours, depending on the damage for most jobs. The room is left tidy and ready to use once it has cured.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, typically by the following day, the bath is ready to use.
Before we arrive
- Mention if the room is upstairs or in a flat
- Ensure the room can be ventilated
- Tell us about any previous repairs or coatings
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Advice
Bath repair in Enfield Chase without replacing anything
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, typically in a single visit. We’re frequently asked to fix cracks in an acrylic bath and scratches you can feel with a fingernail, across whirlpool & spa baths, acrylic and pressed steel enamel.
Every repair comes with our one-year guarantee.
- Area
- Enfield Chase (EN2, N21, EN1)
- County
- Greater London
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Enfield Chase
What else we do in Enfield Chase
Questions from Enfield Chase
Do you work in Enfield Chase?
We do. We send a technician to Enfield Chase for every job, and the price is the same as everywhere else.
Are there extra charges for Enfield Chase?
There’s no separate call-out charge. Your fixed price includes everything.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair something that is been repaired before?
Typically, yes. The old repair comes out first.
Is a holed acrylic bath repairable?
Normally. Photos of the hole and the underside help us check.
Do you cover the whole of Greater London?
We cover the entire UK, including Enfield Chase and the rest of Greater London. Just include your postcode and we will offer you dates.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
What we are called out for in Enfield Chase
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
The things customers generally mention when they call include:
- Deep scratches in acrylic
- Chips under the taps
- Chips on the rim or sides
- A failed DIY repair that’s discoloured or lifting
Comparing quotes
- Is the price fixed, and does it include VAT?
- Who will actually do the work
- Whether there are any call-out or travel charges
- How your room will be protected
What bath repair costs
Prices start from £95. You won’t pay by the hour. The price depends on:
- How hard the colour is to match
- How easy the damage is to reach
- How much damage there is
- Doing more than one item at once
The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
Getting a price from photos
You can normally get a fixed price without us visiting. To help us price it:
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- Natural light rather than flash
- A coin or ruler next to the damage for scale
For a price in Enfield Chase, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Our work in Enfield Chase
Enfield Chase is about 3 miles north-west of Edmonton, in Greater London. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Enfield Chase is one of 764 towns and villages in Greater London where we work. You can also see our page for London, about 11 miles away.
Jobs in EN2, N21 and EN1 work the same way as everywhere else we cover. From Monks Road, Audley Road and Nunn's Road or a nearby road, a technician can come to you. Being close to the A1005, Enfield Chase is simple for us to get to. Nearby, we also work in Enfield (1 mile east), Gordon Hill (1 mile north-east), Bush Hill (1 mile south-east), Clay Hill (1 mile north-east) and Bush Hill Park (1 mile south-east). Within a short drive, we also cover London (11 miles south), City of Westminster (10 miles south), Marylebone (10 miles south), Kensington (12 miles south-west), St Pancras (9 miles south) and Shoreditch (9 miles south).
Local landmarks in Enfield Chase
Typical jobs here are in homes near Chase Side Primary School, The Old Wheatsheaf pub and Grange Park Preparatory School, among other places. Also close by are Enfield Town Park (0.7 miles south-east), Enfield County School for Girls (0.6 miles east) and Church of St Mary Magdalene (under half a mile south). There is a railway station in Enfield Chase itself: Enfield Chase station. A little further out are Museum of Enfield (0.8 miles south-east) and Municipal Borough of Enfield (1 mile north). Open spaces near Enfield Chase include Pole Hill and Oakleigh Park Rail Cutting.
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Avoid scourers, wire wool and gritty cream cleaners
- Rinse the bath after use, especially in hard water areas
- Fix dripping taps early to stop staining and limescale
- Ensure an acrylic bath is firm underfoot
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Work for landlords and builders
Landlords, letting agents and housing providers in Enfield Chase use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For anyone letting property in or around Enfield Chase, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Should you replace it?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. A repair keeps it in place. Prices start from £95. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- Rooms protected and left tidy
- A fixed quote before you book
- Same prices wherever you are
- Work done at your home or business
Read our prices page or bath cost comparison.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Enfield Chase
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
