Northamptonshire · England
Bath chip & crack repair in Everdon, Northamptonshire
Problem with your bath in Everdon? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Impact holes in acrylic
- A chipped rim or side
How we handle bath repair in Everdon
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We’re often asked to fix scuffs and scratches in the surface and a hole punched through by something heavy, on roll-top & freestanding, pressed steel enamel and cast iron enamel.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Everdon (NN11)
- Area hub
- Northamptonshire
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath repair in Everdon
I tried a repair kit. Can you fix it?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
How invisible is a bath repair?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Do you work in Everdon?
We do. Repair technicians travel to Everdon from across the region, and the price is the same as everywhere else.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
For landlords and businesses
For anyone letting property in or around Everdon, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
Landlords, letting agents and housing providers in Everdon use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Common problems we fix in Everdon
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.
Most people contact us after spotting something like this:
- Chips along the edge of the bath
- Impact holes in acrylic
- Rust spots around the plughole
- A chip where the taps sit
Comparing quotes
- Aftercare advice
- What preparation is included
- Who turns up on the day
- Is the price fixed, and does it include VAT?
How to care for the repair
How the surface is treated afterwards matters:
- Store metal items away from the bath
- Cover the bath during DIY or decorating
- Do not leave a fresh chip for long
- Fix dripping taps early to stop staining and limescale
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
The process
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We tidy up before we leave and tell you when it’s ready to use.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the day after, the bath is ready to use.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Ensure the room can be ventilated
- Have somewhere for us to park nearby if possible
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
Also in Everdon
When a repair isn’t the answer
It helps to know what we cannot do too:
- A bath worn all over, where resurfacing makes more sense
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send photos and we will give you a straight answer before you book.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
What affects the price in Everdon
Prices start from £95. Prices are worked out job by job, from your pictures. What matters most is:
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- What kind of damage it is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Send pictures for a quote
Phone pictures are fine, there’s no need for anything special. Just make sure we can see:
- Details of any past repairs
- Any details about the material
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Everdon and nearby
Everdon is about 4 miles south of Daventry, in Northamptonshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Everdon is one of 364 towns and villages in Northamptonshire we cover. Our jobs stretch from Everdon to Birmingham (about 37 miles away).
Postcode districts we cover here: NN11. Jobs here include addresses on High Street, The Green and Well Lane and the roads around them. We also cover the places around Everdon: Little Everdon (1 mile north), Newnham (2 miles north-west), Dodford (2 miles north-east), Badby (2 miles north-west) and Drayton (4 miles north-west). We also work in nearby towns such as Northampton (11 miles east), Brackley (12 miles south), Towcester (9 miles south-east), Moulton (13 miles north-east), East Hunsbury (10 miles east) and Wootton (11 miles east).
Landmarks near Everdon
Typical jobs here are in homes near Newnham Primary School and Church of St Mary and the streets around them. Further afield, we also cover the area around Farthingstone Castle Dykes (1.6 miles east) and Daventry Museum (3.4 miles north). Green spaces nearby include High Wood and Meadow and Newnham Hill.
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
