Worcestershire · England
Bath chip & crack repair in Evesbatch, Worcestershire
We travel to Evesbatch for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A hole punched through by something heavy
- A failed DIY repair that’s discoloured or lifting
How we handle bath repair in Evesbatch
Most of our bath repairs take a few hours, and you can typically bathe again the following day. You won’t need a plumber or tiler, because the bath doesn’t move. We work on acrylic, pressed steel enamel and roll-top & freestanding, and the jobs we see most are deep scratches in acrylic and snagging damage from a refit.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Evesbatch (WR6)
- Region
- Worcestershire
- Warranty
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What happens on the day
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. You can expect it to take two to three hours for most chips.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Point us to the nearest place to park
- Open a window if you can
- Let us know about parking or access
Getting a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Related advice
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
What affects the price in Evesbatch
Prices start from £95. Prices are worked out job by job, from your pictures. The main factors are:
- The size and number of damaged areas
- Whether we combine several jobs
- What the surface is made of
- Unusual colours or finishes
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send photos for a quote
We price nearly every job from pictures. This is what to send:
- One sharp close-up of the damage
- A photo taken from further back
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- A dripping tap stains enamel, so fix it early
- Have new chips seen to early
- Do not leave razors or cans standing in the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Evesbatch and nearby
Evesbatch is about 6 miles west of Great Malvern, in Worcestershire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 376 towns and villages across Worcestershire. You can also see our page for Birmingham, about 34 miles away.
All of WR6 is covered, from the main roads to the quietest streets. Nearby, we also work in Fromes Hill (1 mile south-west), Bishops Frome (1 mile west), Ridgeway Cross (2 miles east), Stanford Bishop (2 miles north) and Westfield (3 miles east). Within a short drive, we also cover Worcester (11 miles north-east), Great Malvern (6 miles east), Malvern (6 miles east), Warndon (13 miles north-east), Rainbow Hill (12 miles north-east) and St Peter the Great (11 miles east).
Local landmarks in Evesbatch
Our clients here include homes close to Major's Arms Public House and Church of St Andrew and the streets around them. A little further out are Bromyard Community Hospital (4.4 miles north-west) and Castle Frome Castle (1.7 miles south-west). Not far away are Pimple Hill.
Also near Evesbatch
More services for Evesbatch
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
FAQs for Evesbatch
When can I have a bath again?
Most baths can be used the day after. We confirm the time before we leave.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Can you quote from photos?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
When we’d advise against a repair
In fairness, there are a few things a repair won’t fix:
- Cracks in parts of an acrylic bath we can’t get to from below
- Leaks from the waste or overflow fittings (a plumber’s job)
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
Do you need bath repair in Evesbatch?
Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
These are the problems we’re asked about most:
- Snagging damage from a refit
- Damage beneath the taps
- Scuffs and scratches in the surface
- A cracked acrylic bath
What to look for in a quote
- How long it needs to cure
- What protection goes down before work starts
- Who will actually do the work
- Whether there are any call-out or travel charges
About our accreditations · Every repair comes with a one-year guarantee.
