Orkney Islands · Scotland

Bath Repair for Evie homes

Bath repair in and around Evie: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Snagging damage from a refit
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Evie

What bath repair costs

Repairs from £95. We price every job individually, from your pictures. The main factors are:

  • Previous DIY repairs that have to come out
  • The type of damage
  • Where the damage is and how we get to it
  • The material

Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Quotes from your photos

We price nearly every job from photos. This is what we need:

  • A wider photo showing the whole bath
  • A clear, close picture of the problem area
  • The postcode, so we can plan the visit
  • Something in shot to show the size

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Bath repair at your home in Evie

A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath and the tiles around it. You can generally use the bath the following day. We regularly repair roll-top & freestanding, whirlpool & spa baths and pressed steel enamel, and common reasons people contact us are a cracked acrylic bath and rust by the waste and overflow.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.

Location
Evie (KW17)
County
Orkney Islands
Warranty
One year on every repair
Quotes
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Different materials, different repairs

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.

Why repair rather than replace?

Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Why choose Surface Doctor in Evie

  • Every repair guaranteed for a year
  • Honest advice, even when it means no job
  • Everything repaired in place
  • One visit for most repairs

Take a look at our pricing and resurfacing vs replacement cost guide.

Our work in Evie

Evie is about 11 miles north-west of Kirkwall, in the Orkney Islands. Jobs in Evie are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. We work in 51 places across the Orkney Islands, from the larger towns to small villages.

Jobs in KW17 are booked in the same way as anywhere else. Main roads around Evie include the A966, which makes travel easy. Close by, we cover Tingwall (3 miles south-east), Settiscarth (5 miles south), Brinian (5 miles east), Abune-the-Hill (5 miles west) and Norseman (5 miles south). If you’re somewhere remote, ring us first and we’ll plan the trip.

Near you in Evie

For a walk, there’s Lowrie's Water and Muckle Billia Fiold.

Map of Evie © OpenStreetMap contributors

FAQs for Evie

Are there extra charges for Evie?

We do not add a call-out fee. The fixed quote covers the visit and the work.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.

Do I have to be there?

Someone needs to let us in and show us the job. You do not need to watch us work.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can you repair a failed DIY repair?

Yes. We take out the old repair and do it properly. Mention it when you send pictures.

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

How much does bath repair cost in Evie?

Repairs from £95. We give a fixed quote from your pictures. Send a close-up and a picture of the entire item with your KW17 postcode.

Do you cover Evie?

Yes. We cover the entire UK and travel to Evie. Send photos and we will quote, or call 0345 017 0787.

How to look after the repair

How the surface is treated afterwards matters. Here’s what we suggest:

  • Keep metal cans and razors off the surface
  • Fix dripping taps early to stop staining and limescale
  • Give the bath a quick rinse after use
  • Cover the bath during DIY or decorating

For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.

Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.

Common problems we fix in Evie

Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.

Contact us if you’ve noticed any of these:

  • Rusty patches near the plughole
  • Chips caused by builders
  • Impact holes in acrylic
  • Scuffs and scratches in the surface

What your quote should include

  • Whether there are any call-out or travel charges
  • Whether the colour is mixed to match
  • The length of the guarantee and what it covers
  • How long it needs to cure

How to compare quotes

What a repair cannot fix

Some problems need a builder, plumber or fitter rather than us:

  • Flexing caused by a failed cradle or loose feet
  • Wear across the whole surface, which needs re-enamelling
  • Acrylic cracks with no access behind them

Not sure? Send photos and we will give you a straight answer.

Materials we work on in Evie

  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel

Landlords, agents and businesses in Evie

If you manage property in Evie, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

What happens on the day

We agree an arrival time beforehand, so you know when to expect us. On site, it takes a few hours in most cases. We leave the room clean and ready to use once it has cured.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Open a window if you can
  • Let the surface dry out before the visit
  • Tell us about any previous repairs or coatings

How to get a price

To get a price, send a couple of photos through our quote form or call us. We’ll say right away whether it can be repaired.

Get a fixed quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.