Lincolnshire · England
Bath chip & crack repair in Ewerby, Lincolnshire
Bath repair for Ewerby, without a refit. Send us pictures for a fixed price, then we come to you.
- Repairs from £95
- Chips caused by builders
- A failed DIY repair that is discoloured or lifting
Repair or replace in Ewerby?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. A repair fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there’s no premium for Ewerby. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
- Fixed prices from your photos
- One visit for most repairs
Read our pricing and bath cost comparison.
Bath repair in Ewerby without replacing anything
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, usually in a single visit. Whether it’s rusty patches near the plughole and a chipped rim or side, we can help, on roll-top & freestanding, pressed steel enamel and acrylic alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Ewerby (NG34)
- Region
- Lincolnshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Ewerby
Ewerby is about 4 miles east of Sleaford, in Lincolnshire. Customers in Ewerby get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Ewerby is one of 732 places in Lincolnshire we cover. Our jobs stretch from Ewerby to Leeds (74 miles away).
Postcode districts we cover here: NG34. Local streets include Main Street and Field Lane, and we cover them all. Nearby, we also work in Evedon (2 miles west), Anwick (2 miles north), Ruskington (3 miles north-west), Dorrington (4 miles north-west) and Digby (5 miles north-west). Within a short drive, we also cover Boston (13 miles east), Grantham (15 miles south-west), Sleaford (4 miles west), Woodhall Spa (10 miles north-east), Waddington (14 miles north-west) and Spittlegate (15 miles south-west).
Around Ewerby
Typical jobs here are in homes near Church of St Andrew. Ewerby’s nearest station is Ruskington station, about 2.8 miles north-west. Nearby you will also find Rauceby Hospital (5.5 miles south-west) and North Ings Farm Museum (3.4 miles north-west).
When to call us in Ewerby
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Most people get in touch after spotting one of these:
- A cracked acrylic bath
- A failed DIY repair that is discoloured or lifting
- Scratches you can feel with a fingernail
- Rust spots around the plughole
What your quote should include
- How long it needs to cure
- How the room is protected while they work
- If travel is included in the price
- A fixed price, and whether VAT is included
Honest limits
Before booking, it’s worth knowing the limits:
- A bath that moves underfoot, until its support is fixed
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
If in doubt, send photos and we will say what we think.
What we work on
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
How we price bath repair
Prices start from £95. Prices are worked out job by job. The main factors are:
- Whether old repairs or coatings need taking off
- The material and finish
- How many areas need work
- Access to the area
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send pictures for a quote
We price nearly every job from photos. This is what to send:
- The material, if you know it
- Where you are, by postcode
- Details of any past repairs
- Daylight if possible, and no flash reflection
For a price in Ewerby, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
How the visit works
We work cleanly and quietly. Protection goes down first, then the work takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the day after.
Before we arrive
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
Ask for a price
Most clients in Ewerby get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Common questions in Ewerby
Is a holed acrylic bath repairable?
Generally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Which areas do you work in?
We cover the entire UK, including Ewerby and the rest of Lincolnshire. Just include your postcode and we will confirm dates.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Landlord and trade work in Ewerby
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Towns and villages near Ewerby
More services for Ewerby
About our accreditations · Every repair comes with a one-year guarantee.
