Devon · England

Bath Repair in Exminster

Fixed-price bath repair in Exminster and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • A chipped rim or side
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Exminster

How to care for the repair

Most damage we see is avoidable. A few tips:

  • Cover the bath during DIY or decorating
  • Fix dripping taps early to stop staining and limescale
  • Rinse it down after each bath
  • Stick to mild cleaners and a soft cloth

Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.

Bath repair in Exminster, done in place

Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Common call-outs are for a cracked acrylic bath and damage beneath the taps, on acrylic, pressed steel enamel and roll-top & freestanding.

Whatever the size of the job, it’s backed by a one-year guarantee.

Area
Exminster (EX6)
Region
Devon
Warranty
12 months on all our work
Quotes
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Repairing versus replacing in Exminster

Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • Accredited with CHAS, Constructionline and SafeContractor
  • No need to remove anything
  • One-year guarantee on every repair
  • Honest advice, even when it means no job

Read our prices page and resurfacing vs replacement cost guide.

Exminster and nearby

Exminster is about 3 miles south of Exeter, in Devon. Whether you’re in the middle of Exminster or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 586 towns and villages in Devon.

Our visits in EX6 are booked in the same way as anywhere else. That includes homes on Hill Crest, Townfield and Bucknill Close. We also cover the places around Exminster: Topsham (1 mile north-east), Clyst St George (2 miles east), Ebford (3 miles east), Exton (3 miles east) and Powderham (3 miles south-east). Further out, we also cover Exeter (3 miles north), Exmouth (6 miles south-east), Newton Abbot (12 miles south-west), Teignmouth (9 miles south), Sidmouth (11 miles east) and Honiton (15 miles north-east).

What’s near Exminster

In Exminster, that means homes near Church of St Martin, Exminster Community Primary School and Stowey Arms and the streets around them. Exminster’s nearest station is Topsham station, about 1.5 miles east. Nearby you will also find Powderham Castle (3 miles south-east) and Wonford House Hospital (2.5 miles north). The countryside around Exminster includes Haldon Hill and Bowling Green Marsh RSPB reserve.

Map of Exminster © OpenStreetMap contributors

Different materials, different repairs

Composite and resin

Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

Questions from Exminster

Is a cracked acrylic bath repairable?

Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.

What about rust by the waste?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

Are there extra charges for Exminster?

Travel is included in the price, and we charge the same wherever you are.

Is a bath repair durable?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.

How invisible is a bath repair?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

I’m a tenant. Can you help?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders.

How long before I can use the bath?

Normally by the following day, depending on the repair.

The process

Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. Most jobs take two to three hours for most chips, and you can get on with other things while we are there.

  1. First, we check the damage against your photos and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Open a window if you can
  • Tell us if there are stairs or a lift
  • Mention any earlier repairs or resurfacing

Ask for a price

If you’re in Exminster and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a fixed price

Advice

Work for landlords and builders

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

For anyone letting property in or around Exminster, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.

What we cannot put right

A few problems are outside what a surface repair can do:

  • Rust that has eaten right through a steel bath
  • Cracks in acrylic we cannot reach from underneath
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Not sure? Send pictures and we’ll give you a straight answer.

What we work on

  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel

Signs you need bath repair in Exminster

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

Keep an eye out for these signs:

  • Scuffs and scratches in the surface
  • Rusty patches near the plughole
  • Holes from dropped items
  • A chipped rim or side

Before you book anyone

  • How long the guarantee is and what it covers
  • What protection goes down before work starts
  • What happens if they find more damage
  • When it can be used again

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.