Cambridgeshire · England
Bath Repair for Eynesbury homes
Our repair technicians come to Eynesbury for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A chip where the taps sit
- A failed DIY repair that is discoloured or lifting
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Bath repair in Eynesbury without replacing anything
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. Most baths can be used again the following day. Typical jobs include chips under the taps and chips on the rim or sides, in roll-top & freestanding, cast iron enamel and whirlpool & spa baths.
All our work is covered by our one-year guarantee, wherever you are in Cambridgeshire.
- Where
- Eynesbury (PE19)
- County
- Cambridgeshire
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath repair costs
Prices start from £95. You will not pay by the hour. The price is based on:
- The material
- Doing more than one item at once
- How much damage there is
- The type of damage
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Send pictures for a quote
It only takes a minute to photograph the damage. Please include:
- A wider photo showing the whole bath
- What it’s made of, if you know
- Where you are, by postcode
- Any earlier repairs or coatings
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll say right away whether it can be repaired.
Eynesbury and nearby
Eynesbury is about 1 mile south of St Neots, in Cambridgeshire. We visit homes and businesses in Eynesbury, so nothing has to leave your home. Eynesbury is one of 371 places in Cambridgeshire where we work. Our nearest city page is London, about 50 miles away.
Every address in PE19 is covered. Whether you live on Potton Road, Andrew Road and Edward Road or anywhere nearby, we can come to you. Nearby, we also work in St Neots (1 mile north), Eaton Socon (1 mile west), Eaton Ford (1 mile north-west), Little Paxton (2 miles north) and Wintringham (2 miles east). Within a short drive, we also cover Huntingdon (9 miles north-east), St Ives (11 miles north-east), Cambourne (8 miles east), Godmanchester (8 miles north-east), Brampton (7 miles north) and Sawtry (15 miles north).
Near you in Eynesbury
In Eynesbury, that means homes near Bull Inn Public House At Rear Of Number 34, Ernulf Academy and Parish Church of St Mary, among other places. The closest station to Eynesbury is St Neots station, roughly 1.2 miles north-east. Further afield, we also cover the area around Eaton Socon Rural District (1 mile west) and Boughton (3.5 miles north). Green spaces nearby include Begwary Brook.
When to call us in Eynesbury
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
Keep an eye out for any of the following:
- Chips under the taps
- A hole punched through by something heavy
- Hairline or through cracks in acrylic
- A chipped rim or side
Comparing quotes
- How the colour is matched
- The length of the guarantee and what it covers
- A fixed quote, and whether VAT is included
- If travel is included in the price
How the visit works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours, depending on the damage. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Tell us if there are stairs or a lift
- Open a window if you can
- Let the surface dry out before the visit
How to get a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Places near Eynesbury
Other services in Eynesbury
Repair or replace in Eynesbury?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Our bath repair starts from £95. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Colour-matched on site
- We come to you, anywhere in the UK
- No extra charge for your area
- Nothing taken out or refitted
Read our prices page and bath cost comparison.
Questions from Eynesbury
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you will get one combined price.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
How long does the repair take to cure?
Most baths can be used the following day. We confirm the time before we leave.
Can you quote from pictures?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
How invisible is a bath repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so mention it when you send pictures.
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Make sure an acrylic bath is firm underfoot
- Put a towel in the bath if you’re working above it
- Stick to mild cleaners and a soft cloth
- Get a dripping tap fixed promptly
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
When we’d advise against a repair
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
- Leaking fittings, which need a plumber
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
Landlord and trade work in Eynesbury
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
