Cambridgeshire · England
Bath Repair for Eaton Ford homes
Problem with your bath in Eaton Ford? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Scuffs and scratches in the surface
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Cambridgeshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
How we handle bath repair in Eaton Ford
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. Whether it’s a cracked acrylic bath and chips along the edge of the bath, we can usually put it right, on acrylic, roll-top & freestanding and cast iron enamel alike.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Eaton Ford (PE19)
- Area hub
- Cambridgeshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
How the surface is treated afterwards matters:
- Rinse it down after each bath
- Get any new chip repaired before it rusts
- Protect the bath with a towel when doing jobs nearby
- Avoid scourers, wire wool and gritty cream cleaners
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why us?
- Colour mixed on the day to match
- Fixed prices from your photos
- No extra charge for your area
- Honest advice, even when it means no job
See our prices page or resurfacing vs replacement cost guide.
Places near Eaton Ford
What else we do in Eaton Ford
How the visit works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for a few hours, depending on the damage from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
- Clear the area around the damage
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Related advice
Covering Eaton Ford
Eaton Ford is about 1 mile west of St Neots, in Cambridgeshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Eaton Ford is one of 371 towns and villages in Cambridgeshire where we work. You can also see our page for London, about 51 miles away.
Jobs in PE19 are booked in the same way as anywhere else. Whether you live on Kym Road, Peer Road and Nene Road or a nearby road, we can come to you. Close by, we cover Eaton Socon (1 mile south), St Neots (1 mile east), Eynesbury (1 mile south-east), Hail Weston (1 mile north) and Little Paxton (2 miles north-east). We also work in nearby towns such as Huntingdon (9 miles north-east), St Ives (12 miles north-east), Cambourne (9 miles east), Godmanchester (8 miles north-east), Brampton (7 miles north) and Sawtry (14 miles north).
Local landmarks in Eaton Ford
In Eaton Ford, that means homes near The Recruiting Sergeant Beerhouse pub, Ernulf Academy and Crosshall Junior School, among other places. The nearest railway station is St Neots station, roughly 1.7 miles east. Other landmarks nearby include Eaton Socon Rural District (0.6 miles south) and Boughton (3.2 miles north-east). Not far away are Begwary Brook.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Eaton Ford questions
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Will there be a smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Something went through my bath. Can it be fixed?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
What we are called out for in Eaton Ford
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
People typically call us after spotting one of these:
- Chips along the edge of the bath
- Deep scratches in acrylic
- Holes from dropped items
- Cracks in an acrylic bath
Comparing quotes
- The length of the guarantee and what it covers
- How the room is protected while they work
- Who turns up on the day
- Whether the price is fixed and includes VAT
What a repair cannot fix
A repair isn’t always the answer, and we’ll tell you before we start. Repairs won’t solve:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we can’t get to from below
- A steel bath rusted through
Send us photos and we will tell you honestly before you book.
Materials we work on in Eaton Ford
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
