Kent · England
Bath chip & crack repair in Fairbourne Heath, Kent
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Fairbourne Heath, with a one-year guarantee on every repair.
- Repairs from £95
- Chips caused by builders
- Cracks in an acrylic bath
Bath repair in Fairbourne Heath without replacing anything
A typical bath repair is a few hours’ work, and the bath is back in use the next day. You will not need a plumber or tiler, because the bath doesn’t move. We work on roll-top & freestanding, cast iron enamel and whirlpool & spa baths, and common reasons people get in touch are a chip where the taps sit and a cracked acrylic bath.
You get a one-year guarantee, the same in Fairbourne Heath as everywhere else we work.
- Location
- Fairbourne Heath (ME17)
- County
- Kent
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.
Why book with us
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
- Colour-matched on site
- A year’s guarantee on all work
See our prices page and bath cost comparison.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Your questions about bath repair in Fairbourne Heath
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Which areas do you work in?
Across the UK, so Fairbourne Heath is covered. Prices don’t change with location.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
How do I get a price for bath repair in Fairbourne Heath?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
What bath repair costs
Prices start from £95. We price every job individually, from your photos. What matters most is:
- Where the damage is and how we get to it
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
The price reflects the work involved, not your postcode. You’ll see the full price before you book, with no extras added later.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Any details about the material
- Where you are, by postcode
- A clear, close picture of the problem area
- Details of any past repairs
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll say right away whether it can be repaired.
Also near Fairbourne Heath
Other services in Fairbourne Heath
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Landlord and trade work in Fairbourne Heath
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Fairbourne Heath and nearby
Fairbourne Heath is about 7 miles south-east of Maidstone, in Kent. Anywhere in ME17, we carry out the work at your property. Fairbourne Heath is one of 922 towns and villages in Kent where we work. We work right across the region, from Fairbourne Heath to London (about 38 miles away).
Postcode districts we cover here: ME17. Jobs here include addresses on Lenham Road and Windmill Hill and the roads around them. We also cover the places around Fairbourne Heath: Liverton Street (1 mile east), Ulcombe (1 mile south-west), Platt's Heath (1 mile east), Pollhill (1 mile north) and Grafty Green (1 mile south-east). Larger places within reach include Maidstone (7 miles north-west), Ashford (11 miles south-east), Sittingbourne (9 miles north), Faversham (12 miles north-east), Minster (15 miles north-east) and Kings Hill (12 miles west).
What’s near Fairbourne Heath
We visit homes around All Saints Church, Platts Heath Primary School and The Lenham School, among other places. The nearest railway station is Harrietsham station, about 1.6 miles north of the centre. A little further out are Coldbridge Castle (2.2 miles south-east) and The Dog Collar Museum (2.2 miles north-west).
What happens on the day
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. You can expect it to take a few hours.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Preparing for the visit
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
- Open a window if you can
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you’re under no obligation.
Read more
Do you need bath repair in Fairbourne Heath?
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
These are the problems we are asked about most:
- A chip where the taps sit
- Scuffs and scratches in the surface
- Chips caused by builders
- A kit repair that didn’t last
Before booking anyone
- What happens if the damage is worse than the pictures show
- Is the price fixed, and does it include VAT?
- The length of the guarantee and what it covers
- How the colour is matched
Looking after it afterwards
To keep it looking its best for years:
- Clean with warm water and a mild detergent
- Do not scrub with anything abrasive
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
There is nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
About our accreditations · Every repair comes with a one-year guarantee.
