Torfaen · Wales
Bath chip & crack repair in Fairwater, Torfaen
Problem with your bath in Fairwater? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- Holes from dropped items
About Fairwater
Fairwater is about 1 mile west of Cwmbrân, in Torfaen. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Fairwater is one of 67 towns and villages in Torfaen where we work. You can also see our page for Birmingham, about 75 miles away.
Jobs in NP44 work the same way as everywhere else we cover. Whether you live on Ton Road, Rede Road and Jule Road or a nearby road, we can come to you. Other places close to Fairwater include Greenmeadow (1 mile north), Tŷ-canol (1 mile south-west), Coed Eva (1 mile south), St Dials (1 mile east) and Cwmbrân (1 mile east). Further out, we also cover Pontypool (4 miles north), Abersychan (6 miles north), Pant-teg (3 miles north), Blaenavon (9 miles north), Wainfelin (4 miles north) and Sowhill (4 miles north). Fairwater is among the bigger towns we cover in Torfaen.
Around Fairwater
Locally, our jobs take us to homes close to Fairwater House, Coed Eva Primary and Llanderfel Church, among other places. You’ll also find Boating Lake Park (1.7 miles east) and Fairwater High School (less than half a mile north-west). Fairwater’s nearest station is Cwmbran station, about 1.6 miles north-east of the centre. Nearby you will also find Cwmbran Shopping Centre (1.3 miles north-east) and Risca Industrial History Museum (3.3 miles south-west). For a walk, there is Mynydd Twyn-glas and Cwm Lickey Lake.
How we handle bath repair in Fairwater
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. We work on cast iron enamel, pressed steel enamel and whirlpool & spa baths, and common reasons people contact us are snagging damage from a refit and rusty patches near the plughole.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Location
- Fairwater (NP44)
- Region
- Torfaen
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we are called out for in Fairwater
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
It’s worth getting a quote if you see:
- Rusty patches near the plughole
- Damage beneath the taps
- A kit repair that didn’t last
- Chips on the rim or sides
Questions to ask before you book
- How your room will be protected
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
- What preparation is included
Prices and what affects them
Repairs from £95. Each job gets its own fixed price. This is what makes a difference:
- The material
- Any earlier repairs that need removing first
- The type of damage
- Doing more than one item at once
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what helps:
- A clear, close picture of the problem area
- A wider photo showing the whole bath
- Whether it’s been repaired or coated before
- What it’s made of, if you know
To get a price, send two or three photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
FAQs for Fairwater
What does bath repair cost?
Prices start from £95. Because every job differs, we price from photos. You will get a fixed figure before booking.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Is a bath repair permanent?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. Then we’ll agree a date.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Nearby places to Fairwater
Also in Fairwater
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
How it works
We begin by going over the job with you. Next, we cover and mask everything nearby and we start. It normally takes a morning or an afternoon, and we will tell you if anything changes.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Let us know which floor the room is on
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- A dripping tap stains enamel, so fix it early
- Keep metal cans and razors off the surface
- Protect the bath with a towel when doing jobs nearby
- Do not leave a fresh chip for long
Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
Should you replace it?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. Repairing it leaves it where it is. Our bath repair starts from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Fairwater
- Nothing taken out or refitted
- Work done at your home or business
- No extra charge for your area
- One visit for most repairs
See our prices page and resurfacing vs replacement cost guide.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
About our accreditations · Every repair comes with a one-year guarantee.
